NOTE: This is BOTH the AGA-T+ (Polycarbonate Tank) and the AGA-T2 (Pyrex Tank). You will get the AGA-T2 (Pyrex) plus an additional Polycarbonate tank!
NEW! Top cap is no longer threaded allowing the user to adjust the position of the airhole (adjustable throat hit)
NEW! Chromed outer finish for a more attractive appearance
Rebuildable using mesh or rope wick
Approx. tank capacity 3ml
Sealed Battery Connector
Air hole located on outer casing (see images)
Stainless steel body and base with rubber o-ring seals and plastic tank (0.08 in. thick)
Fits most 510 drip tips
Polycarbonate tube, upgradeable to Glass Tank
Dimensions: 2.34" x 0.87" (length x diameter)
What you get:
1 x AGA-T+ Rebuildable Atomizer Tank
1 x Polycarbonate (PC) Tank and 1 x Pyrex Glass Tank
1 x stainless steel mesh (45mm x 45mm)
1 x 0.16mm Kanthal Wire
Extras: Some rubber washers, rings, nuts and screws.
** Special Offer: Stainless Steel AGA Drip Tip = RM10 ONLY when bought with this AGA-T !
** Limited Time Offer: Also get the latest wick innovation -2.5mm x 35mm Stainless Steel Rope Wick for your AGA-T ! Click here for more info.
The AGA-T is different. How so? It just makes every vape taste purer and better. We carry it because it's also made of 100% 304 Stainless Steel, unlike some other genesis clones out there which are just chrome plated brass. Those taste awful once the chrome fades, and heating brass can release zinc oxide fumes which can cause irritation of the eyes, nose, and throat and a flu-like illness!
Being a rebuildable this also means big savings and adjustable vapes in the long term. Its large capacity also makes this a practical atomizer for all vapers but definitely requires quite a bit of patience and technical knowledge to get it going. Steel wire mesh and coil are provided with this atomizer but we do recommend that you get some spares as the first build might not go down the way you want it to. The features are as below:
Genesis-style atomizing - steel mesh + open-coil for the purest and cleanest tasting vape.
Polished and durable rebuildable atomizer made from stainless steel. Comes with both PCC and Pyrex glass tanks. Perfect for tank cracking juices!
Great taste, throat hit and vapor production! Extra smooth and cool vape. Adjustable depending on your needs!
HINT: Align the airhole on the cap next to the wick for best results!
Perfect for discerning vapers - It can be set up in multiple ways, either use the horizontal coil posts for cotton/bamboo/silica or go with the more traditional Genesis set up and a vertical coil with the other terminals. You can also adjust your atomizer resistance rating by coiling it the way you like it.
Beautiful shiny chrome looks great on any mod (Lavatube, Evic, Provari etc.)
Rebuildable. Can be completely dismantled and reassembled for ease of cleaning. Extras included free. Coils must be assembled yourself with wire mesh and suitable coil wires.
Universal 510 threading. Can be used on all eGo batteries or PV mods
Combined Shipping Allowed!
Buy with Confidence - Safetrade Accepted!
*We HIGHLY recommend that you read up on DIY assembling of coils and wicks before proceeding to change it yourself.
Note : The seller assumes all responsibility for listing this item. Please contact the seller to resolve any questions before or after purchasing the item. Currency is RM (Ringgit Malaysia) unless otherwise noted.