6-24x50 AOEG World Class Mil-Dot Rifle Scope red + Green Crosshair
You are getting a new 6-24x50 AOEG Rifle Scope with
Free rings mount (11mm)!
This riflescope can be coupled with airgun, hunting rifle, semi-automatic rifle etc.
crosshair being used instead of the traditional front sight and notch base the aiming speed, accuracy and percentage of hits are greatly increased.
Its outer covering is made of high - strength aluminium alloy and undergoes special anti-corrosive treatment, and the surface of all the optical spare parts are plated with anti-reflection coating.
it is anti vibration, fog-proof and shock-resistant, etc
Scope is installed on gun by means of mount. Rotate scope tube so that vertica crosshair is vertical and hori-zontal crosshair is horizontal. Adjust the position of scope on the rifle so that proper eye relief is achieved. Then tighten all screws to fix scope on the rifle firmly.
Aim at a target 100 m away and fire at it. If the impact point deviates from the aiming point, measure the vertical and right handwheel covers of the scope and turn two handwheels in the direction showed in the table below. Keep on firing and adjusting untill the impact point coint coincide with the aiming point.
One click on handwheel equals to 1/2 or 1/4 inch displace-ment on the target 100 m away (see performance parameter table).
Magnification of the scope with magnification adjusting system can be varied by rotating power ring.
Look through scope within 3 or 4 inch distance from your eye to eyepiece lens,If you can't see the reticle clearly,loosen knurled lock ring and rotate eye bell until the reticle appears clearest.Then screw the lock ring to lock the eye bell firmly.
Superior riflescope has distance ad-justing device. When shooting at target,rotate distance rign to corresponding position.
Note : The seller assumes all responsibility for listing this item. Please contact the seller to resolve any questions before or after purchasing the item. Currency is RM (Ringgit Malaysia) unless otherwise noted.