The eddy™ bottle makes portable hydration simple—just flip, bite and sip. The .75L size fits easily in the hand and is compatible with most cup holders. The loop handle makes it easy to clip to a pack or comfortably carry in the crook of your finger. The spill-proof design, durable construction and BPA-Free materials make it an ideal bottle for work or play.
Redesigned cap and bite valve provide faster flow and enhanced durability
Flip, Bite and Sip. No tipping required (though possible: just remove the straw)
New, sleek shape fits in the hand and most cup holders
Dishwasher Safe: All parts are top-rack dishwasher safe
Durable and spill-proof
Easy to carry: Integrated loop handle makes it easy to clip a carabiner or carry with the crook of a finger
100% free of BPA and BPS
Wide-mouth opening is easy to fill with ice and water and a breeze to clean
CamelBak Big Bite™ Valve is compatible with CamelBak® eddy™ and CamelBak® Groove® bottles
CamelBak® Got Your Bak™ Guarantee: If we built it, we'll Bak it™ with our lifetime guarantee.
Hydration Capacity: 25 oz / .75 L
Total Weight: 5.4 oz
Always: 100% BPA-Free
Warranty: Got Your Bak™ Lifetime Guarantee
Bottle Material: BPA-Free Eastman Tritan™ Copolyester. Tritan makes the eddy™ clear, vibrant, durable, dishwasher safe and 100% BPA-Free.
Cap Material: BPA-Free Polypropylene
Bite Valve Material: The CamelBak Big Bite™ Valve is made from medical grade silicone
Country of Origin: China
CLEANING THE EDDY
The bottle, bite valve, straw and lid can be cleaned in the top rack of the dishwasher or by hand with warm, soapy water. Pull off the bite valve and straw from the cap. If you like to use a bottle brush, we don’t recommend forcing a brush through the Bite Valve slit. If you have the brush kit, run the small brush through the straw.
For a deeper cleaning, add a drop of mild soap or tablespoon of bleach to a clean glass jar filled with water. Drop the bite valve, straw and cap into the solution, and tightly close the jar’s lid. Shake the mixture around for 30 seconds, and then let the parts soak for about 15 minutes. Rinse and shake dry.
To re-assemble the lid: Flip the stem collar (the component the bite valve attached to originally) to the open position. Orient the bite valve so the finger tab points towards the front of the cap. Push the bite valve firmly onto the stem collar. Press the straw back into place on the bottom of the lid. Ensure the straw covers the notches completely.
FIRST-TIME USE: WHAT’S THE CLEAR THING ON TOP OF THE CAP FOR? DO I REMOVE IT OR CUT IT TO DRINK?
The clear thing is the CamelBak® Big Bite™ Valve. This patented feature provides easy drinking and spill-proof safety. Do NOT remove or cut this piece to drink. Simply bite it slightly and sip as you would out of a straw.
CAN/HOW DO I FREEZE THE CAMELBAK® EDDY™ WITH BITE VALVE?
You can freeze the bottle but make sure:
The bottle is not completely full when you do this (we recommend only 3/4 full to allow for expansion of the water as it freezes to ice).
The bottle is right side up
We also recommend that the bite valve stem NOT be flipped up or down if there is any frozen water in the tube. Wait until thawed.
CAN I USE THE CAMELBAK® EDDY™ IN HIGH-ALTITUDE/ LOW-PRESSURE ENVIRONMENTS (I.E. AIRPLANES, MOUNTAIN ALTITUDES, ETC)?
Yes, but with special care because pressure can force liquid out through the straw. Keep the bottle right side up with the bite valve in the closed position. Remove the straw for additional protection. Expect a bit of “spurt” during the first sip. You may also twist the cap open to release any pressure and then close before your first sip.
CAN I PUT HOT LIQUIDS IN IT?
We do not recommend using with hot drinks because the experience will be similar to drinking hot liquid through a straw.
WHAT HAPPENS IF I PUT SPORTS DRINKS/JUICE IN THE CAMELBAK® EDDY™?
Use of any of these drinks in the bottle is fine, but thorough cleaning after each use is recommended.
CAN I USE WITH CARBONATED BEVERAGES?
You can use any beverage in the CamelBak® eddy™, however we do not recommend the use of carbonated beverages with the straw configuration because pressure can force liquid out through the straw. To use with carbonated beverages, we recommend that you remove the straw and drink via “tip and sip.”
WHAT MAX TEMPERATURE (FREEZING/BOILING WATER) CAN THE CAMELBAK® EDDY™ WITHSTAND?
The CamelBak® eddy™ can withstand being filled with boiling water or stored in below freezing temperatures. We do not recommend boiling the bottle itself. Is the CamelBak® eddy™ microwave safe?
Feel free to use the CamelBak® eddy™ to warm up liquids (ie. up to a minute), but we don’t recommend cooking your dinner in it. Do NOT microwave with the cap in place as it contains metal screws that are not microwave safe.
DOES THE CAMELBAK® EDDY™ WORK WITH BACK COUNTRY PURIFIER FILTERS/MICROFILTERS?
The CamelBak® eddy™ is compatible with filters that adapt to a 63 mm screw top opening (in other words, it’s compatible with most filters on the market).
DOES IT HOLD RESIDUAL TASTE?
No, there is no residual taste in the bottle materials, and it’s also stain-resistant. Some sports drinks and other flavored beverages can leave behind residue of flavor oils that could require extra cleaning.
WHAT HAPPENS IF I TAKE THE STRAW OFF?
Removal of the straw allows a “tip and sip” mode of drinking
WELCOME TO ORIGEARS
Last Updated @ 3/10/2017 12:22:52 PM
Questions & Answers Ask Seller
Recently Viewed Items
Questions & AnswersDo you have any questions to ask merchant about this product Ask Seller
0.0 stars out of 5