Operating
Instructions:
Voltage Selection
1.Determine Proper output Voltage Setting. Check rating plate and the
coltage indication marked next to the input jack on your computer. You
may find the voltage in your AC adaptor or in the computer user's
manual.
2.Set the Voltage Switch on the body of the adaptor in the Proper
Voltage
TIP
Polarity Selection
1.Determine proper connector size. Please note that the polarity of the
connector plugs are presented with the positive tip in centre. Reversed
polarity can result in permanent damage to your computer.
2.Insert Connector Output Plug into your Computer.
3.Insert Adaptor into Vehicle Lighter socker. Green LED will light to
indicate proper Operation. If LED fails to light. See FUSE REPLACEMENT.
4.Turn on Computer. LF it does not operate, immediately disconnect and
review the above steps.
FUSE
REPLACEMENT:
To check or replace fuse, simply rotate the plastic tip at the end of
adapter counterclockwise.
Visually inspect fuse element. If Blown of if you are unsure, replace
(10 AMP)
Caution:
1. For DC12V Car Use Only
2. Ensure correct Voltage & Polarity is used as continuous excess
voltage or false polarity could damage your comnuter.
3. Do not use this adaptor with appliance that exceeds 70W
4. Do not attempt to open this unit.
5. Remove from vehicle lighter socket when not in use.
6. Always turn off the computer before you connect/ disconnect the car
adaptor.
7. Please do start the car engine first then plug in the car adaptor
PM
(
, Others :, RHB, Public
