
HAVE
QUESTIONS? PLEASE READ OUR FAQ.
High
Quality Regulated Switching Mode AC/DC Power Supply
- 12V 2A with
5.5mm*2.5mm Plug with Long Cable
Model: ITE NU20-5120200-13
Specifications:
- INPUT: 100 -240ACV ~ 50/60Hz; 1.0A 48-62VA
- OUTPUT: 12DCV 2000mA (2A)
- Polarity: +ve at center.
- Plug:
5.5mm * 2.5mm (as shown below, this plug is by large the most common DC
plug that is being used on a wide range of product)
- Cable length: apprioximately 160cm + 160cm =
320cm
- Item weight: approximately 250g (with extension cable)

Some General
Background Information On Power Adapters:
A
switching-mode power supply is a power supply that provides the power
supply function through low loss components such as capacitors,
inductors, and transformers ^^ and the use of switches that are in one
of two states, on or off. The advantage is that the switch dissipates
very little power in either of these two states and power conversion
can be accomplished with minimal power loss, which equates to high
efficiency.
How to judge whether this adapter is suitable for your device:
- Make
sure the connector/plug match your device (refer to the specification
below). You can opt to change the plug by soldering a new plug or
simply cut the cable in between and connect it to you old spoiled
adapter's plug, but please note these modification will be ALL AT YOUR
OWN RISK.
- Make
sure the voltage (V) of your device match this adapter's output voltage
(V)
supply, over-supply of voltage will definitely damage the device,
under-voltage sometimes might harm too.
- Make sure you device's
current requirement in term of Ampere (A) is below this
adapter's
rated output current. Conversion: 1A = 1000mA. Close-match will be
ideal, over-supply normally won't harm the device, but never
under-supply.
- For more in-depth consideration, a good reference is here.
Disclaimer:
Power supply is a very complicated subject which involve numerous
factors (some of which are uncontrollable, such as abnormal power
surge, lightening strike etc), the above information is only provided
as added service to customer
in helping them to make a more informed desicion. If in doubts, kindly
refer
to sources which you deem reliable. We shall not be liable for
any
consequential, incidental, or contingent damages whatsoever as a result
of adopting the above advises.
Buyer to pay the Shipping and
Handling as the following options:
PosDaftar
West & East Malaysia: RM5.00
Please
note that the Default Shipping Method for this small item is PosDaftar,
which typically will take 3 to 6 working days to reach, if you prefer
courier service (typical transit time: 1 to 3 working days), the
charges as indicate as below:
Courier Service West Malaysia: RM6.00
Courier Service East Malaysia: RM9.00
*Handling
charge for additional unit or combined shipping with other items: RM2.00
*NOTE:
The
charges mainly for QC procedure and packing works. The highest Shipping
& Handling charges in the assortment applied as base, total
assortment should not exceed 2Kg in weight and should not form
odd-shaped parcels that normally not acceptable to courier. We reserve
the rights to decline the combined-shipment request without further
explanation
Seller Mobile Phone: 016-2335423 (No
SMS please, TQ)
Seller Bank Details:
A/C Name: KEMEN MARKETING
MAYBANK A/C#: 514226220991
RHB BANK A/C#: 21405300073496
Kindly 3rd Party notify choongkt@gmail.com
after fund transfer, should
you bank in cash or fund transfer with other means, kindly email me the
date, time, to which of our account and the total amount for
verification, also, don't forget your delivery address too.
|