loading

HT309 Water Level Controller (2 Levels) / Electronics KitItemID : 184217105

Our Price
RM 23.32
Price includes GST (6%)
Shipping
*Incl GST (6%)
RM 7.42 by courier to Peninsular Malaysia
RM 10.60 by courier to Sabah, Labuan
RM 9.54 by courier to Sarawak
Please select option below

X

Option
:
Please select option
Quantity
- +
Ship From
Johor Bahru / Johor  
Ship To
Within Malaysia ,Ship By: Self Collec
Views
1941
hitectrons
Since 16 Feb 2012

Feedback Score
: 181+
Positive Feedback
: 100.00%
Total Product
: 169
NetPay
Buyer Protection Program
Payments are covered by BPP (Learn More)
Item Specification
  • Report
  • Brand : HT
    Model / SKU : HT309
    Conditions : New

    Product Description


    HT309 Water Level Controller (2 Levels)  / Electronics Kit

    Introduction

    The HT309 is a Water Level Controller with Relay Output which using a copper wire as a sensor to monitor the water level in a tank.  It comes with 2 Levels of LED Indicator which are: 

    LED1 (Red Color) : Low Level 

    LED2 (Green Color) : High Level

     

    Specification

    • Input Voltage: 9V-12VDC
    • 2 Levels Controller (Low and High Level)
    • Reverse Polarity Protection
    • LED Indicator for Relay On
    • With Relay Output 

     

    Assembly Instructions

    • Check off the components in the package against the component listing before assembly.
    • Start with the smallest components working up to the taller components, soldering any interconnection wires last.
    • Place and Solder the components into the board, make sure the components are in right position according to the overlay of PCB
    • Use the copper wire for Sensor 1 (High Level) and Sensor 2 (Low Level) connection, length of Sensor 1 must be shorter than Sensor 2.
    • Connect the pump or valve (purchase separately) to the com (common) and NC (normally closed) contact of Relay .

     

    Test & Adjustment

    • After assembled, please check & ensure the value & polarity for all components were inserted into PCB correctly, wrong polarity connection of capacitors can caused explosion of failure.
    • Next, ensure all these leads are soldered, no solder bridges between adjacent pads and no dry joint.
    • Once confirmed, connect the power source to the circuit board.
    • If all goes well, this kit starts function as following:
    • Pressed a test/manual switch (SW1) to test the circuit without having to trigger the sensors. It also provides a convenient method to manually run the pump, which will run as long as (SW1) is depressed and turn off immediately when (SW1) is released.
    • When the water tank is empty (Low Level Detected), LED 1 (Red) lights up and turn on the water pump or valve.
    • When the water rises to Sensor 1 (Low Level Detected), LED 1 and water pump or valve are stay on.
    • When the water rises to Sensor 2 (High Level Detected), LED 1 goes off while LED 2 (Green) lights up and Relay will be energized to turn off the water pump or valve.
    • The water level will begin to drop if the water is pumped out.
    • When the water falls below Sensor 2 (Low Level Detected), LED 1 lights up & LED 2 stays on and keeps the water pump or valves off.
    • When the water falls below Sensor 1 (Low Level Detected), LED 1 stays on & LED 2 goes off and Relay will be de-energized to turn on the water pump or valve.
    • Repeat the cycle until user turned it off.  

     

    Note

    • Package includes schematic, printed circuit board and components except the pump or valve.
    • You need to have a soldering skill and basic knowledge of testing
    • For any inquiry or other technical problem, please contact us through sales@hitectrons.com or 07-3344473
    • http://www.hitectrons.com

     


    Last Updated @ 11/30/2015 1:09:33 PM


      Buy with confidencewe have 254 Good Ratings from buyers !

    BuyerItem IDDateRatings
    ji**** 183066218 11/29/2016 5:40:00 PM Fast delivery
    ji**** 183066216 11/29/2016 5:40:00 PM Fast delivery
    li**** 171283363 11/3/2016 9:14:00 AM -
    mt**** 169181379 10/23/2016 10:25:00 PM excellent service
    na**** 174536799 10/19/2016 11:35:00 AM -
    ha**** 169565420 10/13/2016 11:28:00 AM best
    km**** 177720598 10/8/2016 7:22:00 AM -
    ch**** 168841088 9/29/2016 10:37:00 PM -





    Questions & Answers   Ask Seller


    Show:
    User:   bahing11/04/2016 07:26 AM
    Question:   Hi. How long take time for delevary?
    Answer:   Hi, its depend on where you stay, usually it takes 1-2 working days.11/04/2016 12:31 PM
    User:   bahing11/04/2016 07:28 AM
    Question:   hi admin how many day take time for delivery?
    Answer:   Hi, its depend on where you stay, usually it takes 1-2 working days.11/04/2016 12:31 PM
    User:   azijoe04/08/2015 11:15 AM
    Question:   Bos.. Sensor boleh detect minyak x. Tq
    Answer:   Hi, sorry, no.04/08/2015 03:31 PM
    User:   akumpunlah13/03/2014 09:24 PM
    Question:   yes.water low = on relay, water high = off relay
    Answer:   In that case, you can use this kitset without any changes since the water pump is connected to NC of Relay in order to pump the water into tank, when the water reached high level detector, Relay will be energized to turn off the pump. When the water dropped to low level detector, relay will be de-energized and pump the water into tank again.
    Thanks.
    14/03/2014 03:20 PM
    User:   akumpunlah13/03/2014 12:49 PM
    Question:   Yes.to control water pump.
    Answer:   Kindly advice whether your application is same as below:
    1. When water is low, Water Pump will be activated.
    2. When water is high, Water pump deactivated.
    13/03/2014 01:10 PM
    See More Questions (1)
    User:   akumpunlah13/03/2014 12:49 AM
    Question:   hello seller, boleh ubah fungsi relay? high water = relay off, low water = relay on
    Answer:   What is your application? Use the relay to control water pump?13/03/2014 09:22 AM
    View All
    User:   bahing11/04/2016 07:28 AM
    Question:   hi admin how many day take time for delivery?
    Answer:   Hi, its depend on where you stay, usually it takes 1-2 working days.11/04/2016 12:31 PM
    View All
    User:   bahing11/04/2016 07:26 AM
    Question:   Hi. How long take time for delevary?
    Answer:   Hi, its depend on where you stay, usually it takes 1-2 working days.11/04/2016 12:31 PM
    View All

    Recently Viewed Items


    Normally will use POSLaju National Courier service to deliver the products.

    If require to use Skynet courier service or Normal Mail, please email or call us directly.

    Normally it take 2-3 working days. Will take longer time if post to East Malaysia.

    The picture is only for reference.

    Kit Set/ Hobby Kit may have slightly different to the picture due to the components used. However it will not effect the function of the product.

    If you need any technical support, please do not hesitate to call or email us.

    email: hitectsb@streamyx.com or hitectrons25@yahoo.com

    Tel : 07-3344471 or 07-3344473

    Fax: 07-3344472

    Questions & AnswersDo you have any questions to ask merchant about this product   Ask Seller


    Display:
    User:   bahing11/04/2016 07:26 AM
    Question:   Hi. How long take time for delevary?
    Answer:   Hi, its depend on where you stay, usually it takes 1-2 working days.11/04/2016 12:31 PM
    User:   bahing11/04/2016 07:28 AM
    Question:   hi admin how many day take time for delivery?
    Answer:   Hi, its depend on where you stay, usually it takes 1-2 working days.11/04/2016 12:31 PM
    User:   azijoe04/08/2015 11:15 AM
    Question:   Bos.. Sensor boleh detect minyak x. Tq
    Answer:   Hi, sorry, no.04/08/2015 03:31 PM
    User:   akumpunlah13/03/2014 09:24 PM
    Question:   yes.water low = on relay, water high = off relay
    Answer:   In that case, you can use this kitset without any changes since the water pump is connected to NC of Relay in order to pump the water into tank, when the water reached high level detector, Relay will be energized to turn off the pump. When the water dropped to low level detector, relay will be de-energized and pump the water into tank again.
    Thanks.
    14/03/2014 03:20 PM
    User:   akumpunlah13/03/2014 12:49 PM
    Question:   Yes.to control water pump.
    Answer:   Kindly advice whether your application is same as below:
    1. When water is low, Water Pump will be activated.
    2. When water is high, Water pump deactivated.
    13/03/2014 01:10 PM
    See More Questions (1)
    User:   akumpunlah13/03/2014 12:49 AM
    Question:   hello seller, boleh ubah fungsi relay? high water = relay off, low water = relay on
    Answer:   What is your application? Use the relay to control water pump?13/03/2014 09:22 AM
    View All
    User:   bahing11/04/2016 07:28 AM
    Question:   hi admin how many day take time for delivery?
    Answer:   Hi, its depend on where you stay, usually it takes 1-2 working days.11/04/2016 12:31 PM
    View All
    User:   bahing11/04/2016 07:26 AM
    Question:   Hi. How long take time for delevary?
    Answer:   Hi, its depend on where you stay, usually it takes 1-2 working days.11/04/2016 12:31 PM
    View All

    Related Products

    hitectrons' Best Seller

    hitectrons' Recently Sold

    hitectrons' Items



    You may also be interested in Tag:



    Note : The seller assumes all responsibility for listing this item. Please contact the seller to resolve any questions before or after purchasing the item. Currency is RM (Ringgit Malaysia) unless otherwise noted.
    Back to Top
    lelong class
     
    subscribe
    Copyright © 2016 Interbase Resources Sdn. Bhd. (465435-U). All product names are trademarks of their respective companies.
    Lelong.my is not affiliated with or endorsed by any company listed on this site.
      Follow us : facebook       Our Partner : paypal
    Our Affiliates : Lmall.my | Superbuy.my | Pretty.my