HT392 EPE Minder (2 Channels Smart Tracker) / Electronics KitItemID : 183976362

Our Price
RM 159.00
Price includes GST (6%)
*Incl GST (6%)
RM 7.42 by courier to Peninsular Malaysia
RM 10.60 by courier to Sabah, Labuan
RM 9.54 by courier to Sarawak
Please select option below


Please select option
- +
Ship From
Ship To
Within Malaysia ,Ship By: Self Collec
Since 16 Feb 2012

Feedback Score
: 181+
Positive Feedback
: 100.00%
Total Product
: 169
Buyer Protection Program
Payments are covered by BPP (Learn More)
Item Specification
  • Report
  • Brand : HT
    Model / SKU : HT392
    Conditions : New

    Product Description

    HT392 EPE Minder (2 Channels Smart Tracker) / Electronics Kit


    HT392 is an EPE Minder consists of two transmitter units and a receiver. If either transmitter becomes separated from the receiver, a buzzer in the latter part will sound. The receiver is fitted with a switch to allow the use of only one transmitter if required.


    Ideal to be used as a two-channel child alarm (to protect either a single child or two children at the same time) but many other applications spring to mind. For example, one transmitter could be placed inside a briefcase and another in a coat pocket. If the user forgot to pick up either of these items and walked away, the buzzer would sound in the receiver. Note that it will not be possible to use this system is either the transmitter or receiver were placed inside metal containers.



    • Input Voltage: 9VDC (Receiver) ; 3VDC (Transmitter)
    • Used IC HT-12D & HT-12E
    • Operation Frequency: 315MHZ
    • Operation Range: 15 Feets
    • Pre-Assembled & Pre-Soldered Transmitter and Receiver Module
    • If the battery voltage in either transmitter or receiver falls below a certain value, or if a transmitter is switched off, a buzzer will sound


    Assembly Instructions

    • Check off the components in the package against the component listing before assembly.
    • Start with the smallest components working up to the taller components, soldering any interconnection wires last.
    • Place and Solder the components into the board, make sure the components are in right position according to the overlay of PCB.


    Test & Adjustment

    • After assembled, please check & ensure the value & polarity for all components were inserted into PCB correctly, wrong polarity connections of capacitors can cause explosion or failure.
    • Next, ensure all these leads are soldered, no solder bridges between adjacent pads and no dry joint.
    • Insert the 2pin jumpers the SW1 and SW2 position to enable both channels or either one position (SW1 or SW2) for single channel only.
    • Presets P1 and P2 should now be adjusted to approximately mid-track position to provide a sufficient "hold off" time plus a small margin.
    • Once confirmed, insert the battery to the transmitter and receiver board.
    • The buzzer should now remain off and only sound when one of the transmitter is switched off or moved out of range.
    • Leave them operating for several minutes, if the occasional spurious bleep is heard, increase the setting of P1/P2 to prevent this happening. 



    • Package includes schematic, printed circuit board and components
    • You need to have a soldering skill and basic knowledge of testing
    • For any inquiry or other technical problem, please contact us through sales@hitectrons.com or 07-3344473
    • http://www.hitectrons.com

    Last Updated @ 6/17/2016 1:13:12 PM

      Buy with confidencewe have 254 Good Ratings from buyers !

    BuyerItem IDDateRatings
    ji**** 183066218 11/29/2016 5:40:00 PM Fast delivery
    ji**** 183066216 11/29/2016 5:40:00 PM Fast delivery
    li**** 171283363 11/3/2016 9:14:00 AM -
    mt**** 169181379 10/23/2016 10:25:00 PM excellent service
    na**** 174536799 10/19/2016 11:35:00 AM -
    ha**** 169565420 10/13/2016 11:28:00 AM best
    km**** 177720598 10/8/2016 7:22:00 AM -
    ch**** 168841088 9/29/2016 10:37:00 PM -

    Questions & Answers   Ask Seller

    Recently Viewed Items

    Normally will use POSLaju National Courier service to deliver the products.

    If require to use Skynet courier service or Normal Mail, please email or call us directly.

    Normally it take 2-3 working days. Will take longer time if post to East Malaysia.

    The picture is only for reference.

    Kit Set/ Hobby Kit may have slightly different to the picture due to the components used. However it will not effect the function of the product.

    If you need any technical support, please do not hesitate to call or email us.

    email: hitectsb@streamyx.com or hitectrons25@yahoo.com

    Tel : 07-3344471 or 07-3344473

    Fax: 07-3344472

    Questions & AnswersDo you have any questions to ask merchant about this product   Ask Seller

    Related Products

    hitectrons' Best Seller

    hitectrons' Recently Sold

    hitectrons' Items

    You may also be interested in Tag:
    ** saluran

    Note : The seller assumes all responsibility for listing this item. Please contact the seller to resolve any questions before or after purchasing the item. Currency is RM (Ringgit Malaysia) unless otherwise noted.
    Back to Top
    lelong class
    Copyright © 2016 Interbase Resources Sdn. Bhd. (465435-U). All product names are trademarks of their respective companies.
    Lelong.my is not affiliated with or endorsed by any company listed on this site.
      Follow us : facebook       Our Partner : paypal
    Our Affiliates : Lmall.my | Superbuy.my | Pretty.my