|
Processor |
One or two 64-bit
Intel® Xeon® processor(s) an 800 MHz system
bus |
|
System Memory |
|
Capacity |
Four DIMM sockets for up to 8 GB of registered
ECC DDR2 400 memory (memory must be populated in
pairs of equal-size DIMMs) |
|
Type |
Registered ECC DDR2 400 SDRAM 72-bit, 240-pin
gold plated DIMMs |
|
Reliability Features |
Corrects single-bit errors, detects double-bit
errors (using ECC memory), and supports Intel®
Single Device Data Correction (SDDC) |
|
Integrated Onboard |
|
Chipset |
Intel® E7525 Chipset |
|
Intel® Server Network Connections |
One Intel® PRO/1000 Server Network Connection
via RJ45 connector (Intel® 82541GB controller);
supports 10BASE-T, 100BASE-TX, and 1000BASE-T |
|
Super I/O Controller |
National Semiconductor* PC87427 |
|
Graphics |
ATI* RAGE* XL SVGA PCI video controller with 8
MB of video memory |
|
Integrated Storage Support |
|
Serial ATA |
Dual-channel SATA controller supporting RAID 0
and 1 |
|
Input/Output |
| PCI |
Four independent PCI buses and six adapter
slots: one PCI Express* x16, one PCI Express x4,
two PCI-X 66MHz, and two PCI 32-bit/33MHz |
| IDE |
Single-channel EIDE for a total of two IDE
devices; dual-channel SATA for a total of two
SATA devices |
| USB |
Two USB connectors (optional header for two
more) |
|
Serial Ports |
External DB9 serial port, internal serial header |
|
Floppy Controller |
1.44 MB and 2.88 MB, 3-mode support |
|
Keyboard/Mouse |
Two PS/2 ports, 8240A-compatible |
|
Intel® Server Management |
|
Software Support |
Intel® Server Management family of software |
|
Fully Validated Operating Systems |
Microsoft* Windows* Server 2003 Enterprise
Edition, Microsoft Windows 2000 Advanced Server,
Microsoft Windows XP, Red Hat* Linux*
Enterprise, SUSE* LINUX* Enterprise Server, and
Novell* NetWare* |
|
System BIOS |
|
Type |
8Mb Flash EEPROM with AMI* BIOS, Multiboot BBS
(BIOS Boot Specification) 1.4-compliant |
|
Special Features |
Plug and Play, IDE drive autoconfigure, SMBIOS
2.3, ECC/parity support, multilingual support,
enabled for rolling/online BIOS updates |
|
Configuration Utilities |
Server Configuration Wizard for easy system
setup of initial Intel Server Management 8
configuration |
|
Jumpers |
CMOS clear, password clear, BIOS recovery, BMC
boot block write protect |
|
Front-Panel Support |
Power LED, hard-drive activity LED, system-
fault LED, power/sleep switch, server network
connection 1 LED, reset switch, NMI switch |
|
Mechanical |
|
Board Style |
ATX |
|
Board Size |
12" x 10.6" (305 mm x 269 mm) |
|
Power Requirements |
| +5V |
3.0A maximum continuous current |
| +5V
Standby |
1.6A minimum continuous current |
|
+12V |
19A maximum continuous current |
|
+3.3V |
8.4A maximum continuous current |
| -5V |
0.0A maximum continuous current |
|
-12V |
0.0A maximum continuous current |
|
Environment |
|
Ambient Temperature |
Operating (system): 10°C to 35°C;
non-operating/storage (system):
-40°C to +70°C ambient |
|
Relative Humidity |
Non-operating: 95%, non-condensing at 30°C |
|
Safety and EMC Regulatory Compliance (Class
A) |
|
(EMC Regulatory Compliance is based on a board
configured in an Intel host system in which
Intel tested the board and found it compliant.) |
|
Country and District |
Certification
Safety and/or EMC |
Regulatory Mark
Safety and/or EMC |
|
Australia and New Zealand |
ACA,
MED |
C-Tick |
|
Canada |
UL
/ Industry Canada |
cURus / ICES |
|
Europe |
European Directives |
CE |
|
International |
CB
Report / CISPR |
Not
applicable |
|
Japan |
VCCI (Verification only) |
Not
applicable |
|
Korea |
RRL |
MIC |
|
Russia |
GOST |
GOST |
|
Taiwan |
BSMI DOC |
Bsmi |
|
United States |
UL
/ FCC (Verification only) |
cURus |