Functions & Features :-
• Designed specifically for AC power supplies up to 2 amps
• No degradation of normal (50/60 Hz) line frequency
• Power indicator lamp provided
General Specifications :-
- Construction : Plug-inConnection: M3.5 screw terminals (chromated steel; torque 0.8 N·m)
- Housing materia l: Flame-resistant resin (black)
- Monitor lamp : Green neon lamp turns on when the power is supplied.
- Operating temperature: -5 to +55°C (23 to 131°F)
- Operating humidity: 30 to 90% RH (non-condensing)
- Mounting : Surface or DIN rail
- Dimensions : W50×H85×D119.5 mm (1.97”×3.35”×4.70”)
- Weight : 330g (0.73 lbs)
Performance :- Between LinesLine To Gnd
- Discharge voltage 410V min. 410V min.
- Max. surge voltage* 700V max. 700V max.
- Leakage current ≤1mA ≤1mA
@300V DC @300V DC
- Rated line voltage 200V AC ----
220V AC ----
240V AC ----
- Response time ≤0.1 μsec.
- Discharge current 1000A (8/20 μsec)
- Max. load current 2A
- Voltage drop ≤2V (50/60Hz)
*The maximum voltage that could pass through the surge protector. Protected equipment must be able to withstand this voltage for a very short time period.
Standards & Approvals :-
- CE conformity: EMC Directive (2004/108/EC)
- EN 61000-6-4 (EMI)
- EN 61000-6-2 (EMS)
- Low Voltage Directive (2006/95/EC)
- EN 61010-1
- Installation category II
- Pollution degree 2
- Max. operating voltage 300V
Note : The seller assumes all responsibility for listing this item. Please contact the seller to resolve any questions before or after purchasing the item. Currency is RM (Ringgit Malaysia) unless otherwise noted.