|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Pivot Ignition Earth Cable Improve Combustion How? please read below:
length : 1m
Improved combustion with compisote earth cable The additional earth wire on our Composite Earth Cable has a conductor circumference 2.5 times the normal wire. This improves the firing speed by reducing voltage loss and increasing conductivity of high frequency waves released by the ignition coil. Moreover, by facilitating ionization during combustion, it improves gas mileage and engine torque. (Patent pending)
By increasing speed of ignition from the start The high frequency waves that occur upon ignition are the primary element in the delay of initial voltage in the ignition coil which secondarily causes the slowdown of initial firing speed resulting in the poor combustion. Due to this one effective method was to add earth between the ignition coil ground and the battery minus. But because the higher frequency waves run through the only the narrow space on the outside wall of the wire conductor, the results were minimal at best. But because the IGNITION EARTH cable has been designed with as a composite type cable with a wire for high frequencies built-in and an outer wall circumference 2.5 times normal, the results are increased conductivity for high frequency waves, faster initial speed upon ignition, and the facilitation of ionization during combustion, which in turn improves gas mileage and engine torque.
Basic Wiring Safety Precaution for adding EARTH to New Model Cars
Gallery for Pivot product range:
All Original from JAPAN Warning!! Immitation/counterfeit Pivot Product: Due to the success of Pivot products, immitation and replicas products are flooding the market. We only sell 100% original from Japan or we will provide full refund! |
| Seller accept the following payment: | ||||||||||
|
![]() |