![ULTRA RACING 2-Point Front Strut Bar: Toyota RAV4 2.4 '07 [UR-TW2-452]](http://40.76.my/Malaysia/ultra-racing-2-point-front-strut-bar-toyota-rav4-2-4-07-ur-tw2-452-0910-23-MaxAudio@14.jpg "ULTRA RACING 2-Point Front Strut Bar: Toyota RAV4 2.4 '07 [UR-TW2-452]")
Feature available to Store Members
ULTRA RACING 2-Point Front Strut Bar : Toyota RAV4 2.4'07 [UR-TW2-452]
A strut bar or strut brace is a mostly aftermarket car suspension accessory used in conjunction with MacPherson struts on monocoque or unibody chassis to provide extra strength between the strut towers.
With a MacPherson strut suspension system where the spring and shock absorber are combined in the one suspension unit, the entire vertical suspension load is transmitted to the top of the vehicle's strut tower, unlike a double wishbone suspension where the spring and shock absorber may share the load separately. In general terms, a strut tower in a monocoque chassis is a reinforced portion of the inner wheel well and is not necessarily directly connected to the main chassis rails. For this reason there is inherent flex within the strut towers relative to the chassis rails.
A strut bar is designed to reduce this strut tower flex by tying two parallel strut towers together. This transmits the load of each strut tower during cornering via tension and compression of the strut bar which shares the load between both towers and reduces chassis flex.
Performance: Resulting from the improved chassis rigidity (similar to that gained from a lower arm bar); may be improved steering precision under high load conditions (cornering and braking). Reduced understeer, tire wear and metal fatigue in the strut tower area may also be experienced.
ULTRA RACING - Chassis Tuning Specialist
Recently Sold Items
PM
(
