The very long awaited YongNuo YN600EX-RT flashes are now available.Like the YongNuo YN-E3-RT transmitter, the YN600EX-RT flashes are directly compatible with the 2.4GHz RT radio system built into Canon’s own 600EX-RT flash, and ST-E3-RT transmitter units.
• Guide Number 60m (ISO-100, 200mm)
• Canon RT Wireless Support (Master and Slave Modes)
• Electronic zoom head 20–200mm
• E-TTL and Manual Power Control
• HSS (High Speed Sync) to 1/8000 Second
• Canon and Nikon Optic Wireless Slave Modes
• S1 and S2 Optical Slave Modes
• PC Sync Port
• External High Voltage Battery Port
• USB firmware updates
Also like the YongNuo YN-E3-RT, the YN600EX-RT flash units provide most of the major functions of the original Canon flash.
And over time there may even be extra functions added. Already Optic Wireless Slave modes for both Canon and Nikon flash systems are supported in the YN600EX-RT flash.
The YN600EX-RT are also YongNuo’s first flash unit available with both HSS (High Speed Sync) functions and an External HV Battery Port in the same flash.
PLEASE NOTE - The YN600EX-RT flashes are not directly compatible with the radio system used by the popular YongNuo YN-622C TTL triggers.
Though the YN600EX-RT will still function with the YN-622C system, provided a YN-622C as receiver is also attached to each YN600EX-RT flash foot.
Global First Aftermarket Radio Transmission Speedlite
Supports RT System
One YN600EX-RT can be used as on-camera master unit and remote slave unit of Canon’s RT system,and supports Gr grouping mode.
Fully Compatible with YONGNUO YN-E3-RT,Canon’s 600EX-RT/ST-E3-RT Wireless Signal
One YN600EX-RT can be used as master unit to trigger YONGNUO YN600EX-RT,Canon’s 600EX-RT,and live display the flash groupings of slave unit and recycling information; One YN600EX-RT can ]respectively receive the wireless signal of master unit YN600EX-RT?YN-E3-RT?Canon’s 600EX-RT/ST-E3-RT, realizing remote TTL?M and Gr flash.
High Guide Number, Supports High-speed Sync
GN60 @ ISO100,200mm; supports high-speed sync TTL, manual flash, Gr grouping flash, the highest synchronous speed can reach 1/8000s
Supports USB Firmware Upgrade
The YN600EX-RT equipped with the USB interface, supports firmware upgrade, the users can download the upgrade firmware through the Yongnuo official website to upgrade the flash.
Supports Wireless Optical Slave function
The YN600EX-RT supports YONGNUO, Canon’s and Nikon’s wireless optical master signal, supports S1 and S2 pre flash cancel mode.
Support Auto/Manual Zooming
The YN600EX-RT supports auto and manual zooming, the flash coverage can be changed between AUTO, 20~200mm.
Settings Save Automatically, Supports Custom Settings (Fn)
The parameters on the flash will automatically save when the flash turned off; the users can customize setting the flash function as needed.
Ultrafast Charging Recycle System, Supports External Power Supply
Equipped with Big Size LCD Display Screen, Standard PC Synchronous Interface
Transmitter YN-E3-RT for Canon:
*T w o - w a y 2 . 4 G r a d i o c o m m u n i c a t i o n , f u l l y compatible with ST-E3-RT/600EX-RT
*15 Physical Channels, 1 Auto Channel, Up to 10,000 customizable photographer ID
*Transmission Range: 100M
*Multi YN-E3-RT can share slave flashes
*Display group/charge status of slave flashes
*Firmware can be upgraded via USB
*High resolution Dot-Matrix LCD, Backlight for LCD/keys
*Fast lock mechanism
*Built-in AF assist beam emitter, buzzer
*Remote shutter release, Linked Shot
*Flash Mode: ETTL/M/Multi/GR 4 flash modes
*A/B/C/D/E 5 groups
*Supports 1st Curtain, 2nd Curtain (Only in M mode),High speed Sync
*Supports ETTL Ratio, Flash Exposure Compensation,
*Flash Exposure Lock, Flash Exposure Bracket, Modeling Flash
*9 Custom Funtions
*Settings saved automatically