Yongnuo YN622 LCD Kit is a combination of YN622-TX master commander with LCD display and YN622 trigger. The world's most popular choice for multiple flashes photography. YN622 triggers support TTL, HSS, manual, multi modes, Flash Exposure Compensation, Flash Exposure Bracketing, modeling Flash, E-TTL group ratios and much more...
These are the most popular triggers worldwide. Paired with YN622-TX master controller they have all the same functions as much more expensive Phottix Odin, Pixel King or Pocket Wizards.
YN-622 TTL wireless flash trigger is a high performance master and slave equipment for multiple flashes photography. Using Digital FSK 2.4GHz frequency band with 7 channels, it has three modes, TTL, Manual and Multi, and it can fire flashes at 360 degree direction. The operating range is up to 100 metres. These triggers support FEC, FEB, FEL, High-speed Sync, 1st. Curtain, 2nd. Curtain, Modeling flash, ETTL II Group Ratio (ALL/A:B/A:B C), Manual/Multi group (ALL/ A:B/ A:B:C), Manual and Multi mode, Auto Zooming, Manual Zooming, AF Lamp...
Support Full ETTL Pass-through function when on camera
1) Mount one YN-622 transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or Multi mode.
2) Mount flash on hot shoe of YN-622C transceiver already placed on camera, mount the second flash on other transceiver, both of flashes can be triggered at any direction in TTL, Manual or Multi mode.
Shutter Sync - The max. sync speed is 1/8000s, but some cameras support only up to 1/4000s, and for those cameras and flashes which don't suport HSS, the sync. speed will be just 1/250s or less. Different cameras have different Sync speed. This depends on camera, and it is not a limitation of YN622C triggers.
YN622C triggers support 1st and 2nd curtain sync
Remote Control Function - The parameter of flashes mounted on hot shoes of receivers can be set up remotely through the camera menu. You can find external speedlite menu in cameras options. There you will change all parameters of remote speedlite
Support mixed mode - With this function, you can trigger remote speedlites in different modes; set up one YN-622C transceiver on hot shoe of flash in TTL mode, set up the second YN-622C transceiver on hot shoe of flash in manual mode, and the third YN-622C transceiver on hot shoe of flash in multi mode, all three flashes can be fired via the transceiver mounted on hot shoe of camera. This mode is especially useful for some older camera bodies without a built-in flash menu. ( you need to set the parameters on speedlites )
Note: Only FEC, FEB, Ratio and Shutter sync can be set in the camera side. Manual and Multi output need to be set on the flash speedlite.
YN622C triggers work with Strobe Studio flash light in HSS function - You can buy a PC Sync Cable LS-PC635 cable to connect the transceiver with the studio flash strobe, and then you can use the non-high speed sync flash to achieve higher synchronization and then you can use them together in HSS. The max. trigger voltage is less than 300 Voltage.
Note: The PC port is for output use only.
Awakening function - When half-pressing the shutter button of the camera, the hot shoe flash mounted on the receiver will be awakened. ( for those flashes which support wake up function).
Zoom Function - Zoom Automatic: zoom length will be changed depending on the changes of the lens setting.
Zoom Manual: Zoom length can be set within 24 - 105mm range
Support Single-contact of camera and flash triggering - You can use YN622C trigger with Nikon camera or Nikon flash, but you have to set YN-622C in manual mode (the max. Sync. speed is 1/250s in this case).
Flash Fire Ratios with ETTL - You can set up different flash fire ratios and FEC for those flashs on hot shoe of receivers
YN622C triggers use 2x AA batteries, (1.2v rechargeable battery or Alkaline), Stand-by time is 60 hours.
Dimension: 89.5 * 53 * 39mm, net weight is 78g.