| ||||||||||||||||||||||||||||||||||||
| Remove banner from my ads, Click here | |
|
Rated voltage DC5V
Rated current 500MA Rated power 2.5W Parameters: Speaker: 4Ω2W (Φ45MM) Battery: 400mAh (0.5 * 3.4 * 4.2CM) Size: 9 * 5.9 * 10CM Function: card, insert U disk, connecting computers, mobile phones, MP3/4/5 etc.
Robot function chart below
"Rev/Vol-" is "on a / sound reduced" button; "Next / Vol +" is "Next / sound add" button; "Play / pulse" is the "Play / Pause" button Toggle switch to the "speaker" position, then the robot used to be a mini speaker Toggle switch to the "reader" position, then the robot to do a small card, inserted U disk speakers use 2.5mm DC jack for the robot's positive with respect to the DC5V power plug 3.5mm audio jack robot for the audio jack, as a mini stereo mode, as the input source to use. Reader as a speaker, if the seat is not inserted audio head, a small robot using the internal speaker to play music, when inserted into the audio first, the robot automatically turn off the internal speaker is included, as a source to use. LED lights red and green robot, green power light to do, under the bright lights in the state of charge, as a charging indicator light, automatically turns off after charging. Red light when doing audio card reader, but also to indicate working state. Steady At this time no work, flashing that is playing music. Robot playing music, the middle of the "Play / pulse" press pause, press again to continue playing. If you need to play the next song, press "Next / Vol +"; If you need to increase the sound, long press "Next / Vol +" does not let go until the sound reaches your desired effect. If you need to play on a short press "Rev/Vol-"; If you need to reduce the sound, press "Rev/Vol-" do not let go until the sound is reduced to the effect you need |
| Seller accept the following payment: | |||||||
|
![]() |