| ITEM DESCRIPTIONS:
ZTE MF30 WiFi hotspot is a 3.5G mobile hotspot
device, working in GSM/GPRS/EDGE/WCDMA/HSPA
network. The client device could connect to it via
USB or Wi-Fi interface. With HSDPA 7.2Mbps
downlink, quad-band GSM and tri-band UMTS, it
gives maximum 5 users super fast Internet
experience all over the world at the same time.
It runs on battery and has a mini USB port and a
built-in LED Indicator on the top and could
supports up to 32GB Micro SDHC memory. The device
supports data and SMS services, enabling you to
communicate anytime and anywhere.
* HSPA+ peak speed up to 7.2 Mbps
* Maximum support 5 users to get internet access
* 802.11b/g Wi-Fi
* Small, lightweight design
* ZTE MF30 3G Router supports up to 32GB microSD
* Auto APN
* SMS Via Wifi and Phonebook management
Setting.. Just plug in SIM and GO..
SMS Via Wifi
and Phonebook Management..
* This HSPA device is peak rated at 7.2
Mbps downlink speed.
* Operates on the 3G networks for wireless
access to e-mail and internet on the move.
* Use 802.11b/g Wi-Fi connection so no
installation is required. Simply enter the
password key supplied and get on line immediately
with your SIM.
* Small, light weight design.
* Supports three working modes: USB Mode, Wi-Fi
Mode, Mixed Mode.
* HSDPA/HSUPA/UMTS 2100 MHz
* GSM/GPRS/EDGE 850/900/1800/1900 MHz
* HSPA+: DL 7.2Mbps, UL 5.76Mbps
* WCDMA CS: 64Kbps UL/DL
* WCDMA PS: 384Kbps UL/DL
Interface: USB and Wi-Fi
* Wi-Fi Standard: 802.11b/g/n
* Wi-Fi Security: WEP/WPA/WPA2/WAPI
* USB Version: USB 2.0 high speed
* USB Interface Type: Micro USB
* MicroSD card: ZTE MF30 supports up to 32GB
* Power Adapter: 5V/700m A Battery: 1500mAh
* Standby time: 100 hours
* Working time: 4 hours
* Weight 65g
* Dimensions (W×H×D):
* Operating temperature: 0℃~+35℃
* Storage temperature: -20℃~+50℃Charging
* Operate System: Windows 7, Windows Vista(32bit
or 64bit), Windows XP(SP2 or later), MAC(10.4 or
* Web Brower: IE(6.0 or later), Firefox(2.0 or
later), Opera(10.0 or later), Safari(4.0 or
later), Chrome(5.0 or later)
The ZTE MF30 hotspotís standby and working time
are only for you reference, and based on ideal
Getting to Know the Device
The following figure shows the appearance of the
1. Power: Hold the Power button to switch on/off
2. Memory card slot (microSD card): it is where
you insert the memory card(MicroSD card)
a. This button is used to start/end Wi-Fi
Protected Setup authentication process and
enable/disable the Wi-Fi function
b. Hold it for 3 seconds to activate the WPS
c. When the WPS function is available, press it
to deactivate the WPS function
d. Press it to enable/disable Wi-Fi function
4. LED Indicator: It indicates the signal type,
signal strength, battery, Wi-Fi, etc.
5. Charger/USB port:
a. Charge your device.
b. Connect the client to your device via USB
Notes: Hold the WPS and Power
buttons simultaneously until the LED screen turns
off, and then release the buttons. The ZTE MF30 3G
Router will restart automatically and restore to
the factory default settings.
Working Mode: ZTE MF30 3G
Router supports three working modes: USB Mode,
Wi-Fi Mode, Mixed Mode.
USB Mode: Connect to the
device with the USB cable.
Wi-Fi Mode: Connect to the
device via Wi-Fi
Mixed Mode: Connect to the
device with the above two connection methods
Notes: If you want to connect
to the Internet by using ZTE MF32 Wi-Fi mode, make
sure that the client supports the Wi-Fi function
BRAND NEW Still Sealed From ZTE.. But
We will open to put the warranty sticker.
Warranty On Manufacturer defects.
Optional Upgrade to 1 Year add
RM29 Only. (Just add to total and remark
to us "Upgrade 1 year")
1 x ZTE MF30 Mifi Router
1 x Battery
1 x Manual
1 x Charger
1 x USB Cable
1 x Receipt
Purchase Accessories at Special Low
1. Micro SD Card:
If you need
this, just pay additional to the total, and
remark to us: "ADD MicroSD XXGB "
4GB: RM25, 8GB: RM45, 16GB: RM85
** Please ensure the total is correct, so the
process is faster and you will get the item
Please visit us at www.comfortsurf.com
for full products range.