For checking and testing the battery and the dynamo connections
Checking the charging level
Functional test of the dynamo
Checking the battery starting capability
Battery overload display
Display with 6 LEDs, clearly shows the status of the alternator and the battery.
Two test clips for simple and safe operation.
Small size and light weight, convenient to carry.
Multiple functions: Alternator status check, battery status check, first charge display and overload check.
Check before charging: the battery is live, "OK" to load.
Alternator status check, battery status check, first charge display and overload check.
Alternator control: Accelerate the engine at 2000 rpm when the green light is on, the charging circuit is ok.
Battery check: Indicates the percentage of charge in the battery.
Battery charger control: When the green light is on, the charge is complete.
Wire Material: 0.06 Square Meters Copper
LED Quantity: 6 (2 Red, 3 Green & 1 Yellow)
Material of wire: 0.06 square millimeter copper
Max. voltage and current: 12V / 15A
Length of wire: 27cm / 10.6inch
Assemble cars, motorcycles, etc. With 12V battery.
6 LED Lights:
Alternator State Check:
First light (red): Fault
Second light (green): Good
Third light (green): Full
Battery state check:
First light (yellow): Middle
Second light (red): Low
Third light (green): OK
Due to different producing batches, product details might be a little different. If you minding the difference, please buy it carefully.
Please allow 1-3cm difference due to manual measurement.
Due to the different display and different light, the picture may not reflect the actual colour of the item. Thanks for your understanding.
1 x Battery Tester With Two Clips