|
DC micro diaphragm pump combines the advantages of self-priming pump and chemical pump, corrosion-resistant materials synthesis of a variety of imports, with self
Suction function, thermal protection, smooth operation, long-time continuous idling long-time continuous load operation, small size, current, pressure
, Low noise, long life, intricate design, inexpensive, etc., with oil, heat, acid, alkali, corrosion resistance, chemical resistance
Chemicals and other properties. Pump and motor separated from the pump body without mechanical parts, no wear and tear.
Pump comes with pressure relief overflow circuit system. Liquid body begins automatically reduced reflux, the pressure inside the pipe will not increase and will not hold water mains burst.
First, the five characteristics:
1, high pressure water pump pressure 4.0LPM
2, the power consumption is small: only 1.6-2A.
3, long life: more than 5 years in the life of the motor.
4, corrosion resistance: the size of the membrane used, synthesized by a variety of imported materials. With oil, heat, acid, alkali, corrosion resistance, chemical resistance
And other properties.
Second, the technical indicators:
Voltage: 12V (9-14.4V)
Current: 1.6-2A about
Pressure: 3.1LPM
General machine installation is 3.1 to 4.0 large selection pressure
Usually pressure: 0.3-0.5 Mpa,
Maximum flow: 3L / min
Weight 0.6KG
Third, use:
1, there is a direction of the arrow on the pump outlet.
2, wire the positive and negative points.
3, the pump can be placed in any direction.
Fourth, Caution
1, can not be immersed in water.
2, the pressure adjustment screw can not be adjusted. Factory, pressure has been adjusted, if adjusted, easy to transfer large reflux pressure capacity
Easy to hold back burst pipes.
3, intake must install filtering devices, can not enter the impurities. Otherwise, easy to plug the pump, resulting in pressure to reduce or even no water.
Fourth, the Common Faults and exclusion:
1, an electric water pump does not rotate. Check the motor behind the wire is off.
2, the pump rotation, water, fog but a small amount of pressure is reduced. Open the pump, check whether there is debris clogging the pump chamber. Motor bracket is loose, tighten the screws. Note that out of the water valve can not be installed backwards
.
3, pumps for six months or a year later, spray a small amount of pressure reduction. Open the pump, tighten the motor bracket screws; the die cavity small exchange up and down direction, or replace the small grinding.
Fifth, use:
Widely used in general industrial equipment, medical equipment, chemical equipment, agriculture (lawn and garden), tourist vehicles, special vehicles, ships, beverage, vehicle cleaning, carpet cleaning, floor cleaning, water purification and water treatment equipment.
1, the production of electric sprayer agricultural use, can also be modified electric hand-pressure sprayer spray (miniature pump mounted directly on the hand pressure sprayer, matched with a battery or hand lamp can be).
2, to solve vehicles, ships, yachts, boats, etc. in use diet, wash sieve, shower, toilet, wash water.
3, food and beverage processing and handling equipment, and transfer of liquid food, distribution, filling and so on.
4, domestic water supply. For example, water-saving toilets, water-saving toilet, electric toilet, water booster systems.
5, the solar industry.
6, water purification industry. For example, purification equipment, water treatment equipment, drinking fountains, water machines. Can be equipped with a towel disposal, drinking fountains, Coke machines, juice machines, dishwashers, disinfection machines, solar bonsai, car washing and other glass manufacturers.
7. Other liquid transfer needs, as well as injection systems and metering equipment. For example, garbage trucks, water truck, carpet cleaning equipment, floor cleaning equipment, vehicles, cleaning equipment, road construction equipment, dishwashers, medical equipment, chemical equipment, chemical equipment, disinfection equipment, cooling systems, pressurizatio
|
