DC12V 2CH RF wireless remote control switch system
1Receiver +3 transmitters
Working Voltage : 12V
Output Current : 10A(10A /CH .It have better less than 7A .It is for the safe and durable)
Working Frequency : 433MZH
please notice that here is in set , we have made it work together before we ship to you , so you don`t have to care about what frequency are they .only someone who buy the receiver or transmitter alone ,he must care about the frequency to match .
Receiver sensitivity: : -105Db
Working temperature : -10`C - +60`C
Output way : Jog /Non-Latched Momentary,Self -lock /Self-Latched /Toggle
Code type :Learning code
press one button is working /ON. loosen your finger on the same button is stop/OFF .one channel switch(receiver) need one buttons remote control (transmitter )
Self -lock/Self-Latched/Toggle :
press one button for one time is working/ON .press the same button again is stop/OFF .(one channel switch(receiver) need one buttons remote control (transmitter)
Please notice that :
here is the 2CH receiver and 2 buttons transmitter /remote control .you can choose the all the working way that you can choose ,
Please tell us the working way that you want after you buy it , if you are not the professional person, we would set the working way as your requirement before we ship .if you have`t tell us we will ship to by to make it at the Jog/Non-Latched /Momentary ,you can change it when you get it .
Press the learning button, it means it has been putting in the study when the indicator light are ON .then you press any buttons of the remote control to transmite signal . it means studying successfully when the indicator flash 2 times until the light goes out .
Remote control (transmitter)
Operating Voltage: DC12V
Operating Current: 30MA
Operating Frequency: 433MHz
Frequency Distance: 20-100M
(please notice that is the ideal distance without any block and signal interfere , it would rise and fall about 10%-50% with the block and signal interference ).
Size: 85 x 37 x 18 mm / 3.3 x1.5 x 0.7 in(L x W x H)