loading


3D Printer Ramps1.4 Controller

RM 39.00 31 Sold
Normal Price
RM 55.00    You save RM 16.00 (29%)
Promotions
Shipping
From Penang , Estimated Arrival 1-3 working days.  
First 0.50KG: RM8.00 
Please select option below

X

Quantity
- +
4 left
*Quantity exceeds maximum allowed
ItemID
157429536
Ship To
Within Malaysia ,Ship By: Courier Services
Weight
0.2 (kg or dimension)
Views
3415
Available Quantity
4
Seller Information
littlecraft
Store since 16 Nov 2014

Feedback Score
: 734+
Positive Feedback
: 100.00%
Total Product
: 731
Full Refund if you don't receive your order*
Popular Products
Item Specification
  • Report
  • Model / SKU : 3D Printer Ramps1.4 Controller
    Conditions : New

    Product Description


    3D Printer Ramps1.4 Controller

    Holiday Notice

    Close from 14 Dec 17 to 16 Dec 17, All order place after 13 Nov 17 will only able to ship on 18 Dec. Sorry for any inconvenience caused.


    Introduction

    Ramps is short for reprap Arduino mega pololu shield, it is mainly designed for the purpose of using pololu stepper driven board (similar to 4988 driven board). Ramps can only work when connected to its mother board Mega 2560 and 4988/DRV8825. Owning to its stability in operation and great compatibility with most 3Dprinter (all reprap-model such as pursa i2 and i3). The combination of Ramps1.4+MEGA2560+A4988/DRV8825 is becoming a mainstream of DIY 3D printer control board.

    Features

    1. Standard interfaces (as that of extruder)

    2. Reserved GCI like I2C and RS232

    3  MOSFET 3 MOSFET are applied to the heater/ fan and thermistor circuit.

    4. Adding another 5A to protect the component parts.

    5. An 11A fuse is added to the hotbed

    6. Support 5 stepper drive board A4988

    7. The adoption of Pin Header as pololu makes it more convenient to repair or change.

    8. I2C and SPI are reserved for expanding

    9. All the MOSFET can be controlled by PWM

    10. Use the interface of servo motor to adjust the level of printing platform automatically.

    11. Adding a SD module for SD ramps module.

    12. LED can indicate the status of the heater (the open and close of MOS).

    13. 2 stepper motor for Z axis in parallel.

    14. Weight: 68g Size: 102mm*60mm

    Software

    Compiling environment: Arduino IDE

    Firmware: Marlin

    PC software: Printrun, Repetier-Host

    Source

    http://reprap.org/wiki/RAMPS_1.4


    Last Updated @ 3/30/2017 4:50:41 PM


      Buy with confidencewe have 3280 Good Ratings from buyers !

    BuyerItem IDDateRatings
    sc**** 192872111 12/19/2017 12:30:00 AM Great seller! Good quality products!!!
    sh**** 191604204 12/16/2017 9:57:00 AM Good service
    sh**** 191604204 12/16/2017 9:57:00 AM Good service
    sh**** 191604115 12/16/2017 9:57:00 AM Good service
    sh**** 191604115 12/16/2017 9:57:00 AM Good service
    sh**** 199352489 12/16/2017 9:57:00 AM Good service
    sh**** 184334743 12/16/2017 9:57:00 AM Good service
    sh**** 195326516 12/16/2017 9:57:00 AM Good service



    Recent Transactions

    Buyer Product Details
    gc**** 3D Printer Ramps1.4 Controller 1 pcs
    15/08/2017
    da**** 3D Printer Ramps1.4 Controller 1 pcs
    04/03/2017
    pa**** 3D Printer Ramps1.4 Controller 2 pcs
    21/02/2017
    Da**** 3D Printer Ramps1.4 Controller 1 pcs
    14/02/2017


    Questions & Answers   Ask Seller


    Show:
    User:   sha****15/04/2016 10:23 AM
    Question:   Hi. Does it comes with 4988/DRV8825 stepper motor driver?
    Answer:   Hi, Not include driver, but we do sell driver. below is the link
    http://www.lelong.com.my/merchant/littlecraft-04.Motor.Driver-C1-252369-1.htm
    15/04/2016 06:57 PM
    User:   RKN****16/06/2015 09:07 AM
    Question:   when got stock again bro ??
    Answer:   Hi.NeXT week new stock will arrive. Can u let me know your email? I will inform u once stock arrived. Thank.16/06/2015 11:34 AM
    User:   azr****07/04/2015 08:18 AM
    Question:   Hi, when will you have stock for this controller?
    Answer:   Hi, Next week will restock. Can I have your contact, will inform once restock back. Thx.07/04/2015 06:40 PM
    User:   ind****13/08/2015 04:48 PM
    Question:   i am interested with your item, please contact us, 0164387061
    View All
    ;

    Please make payment to:-
    May Bank account: 157120224436
    Paypal: We only charge RM2 per transaction + 2% of total price
    If you don't have paypal account, apply one today https://www.paypal.com
    We ship all products with Poslaju.
    You are agree to the terms and conditions when you bidding/buy on this item.
     
    • Colour : due to the setting of monitor, colour might slightly different with the picture.
    • Size : please check carefully with the measurement provided.
    • Please make payment within 3 days after confirmed an order. Buyer who has dishonored payment for 3 times will be blacklisted and reported to Lelong.
    • Please allow 1 to 2 working days to prepare the product delivery after payment. A confirmation email will be sent out with the tracking number.
    • If item is out of stock (this may happen occasionally as we listing more than hundred of items, it is hard for us to control our stock), we will contact you immediately for a refund or exchange, or wait for the new stock arrive. Anyway, we may replace some similar item should you agree. A last we will refund back your money should you wish not to change or wait for the item arrive.
    • We will check and do the best to make sure the item in good condition before send out. Any inquiries please contact us through email.
    • Prices, specifications, information and availability of products are subject to change without prior notice.

     

    • We accept return if item is defective upon received.
    • All items comes with warranty and official receipt (Can be downloaded at lelong). Anything can contact back seller.
    • Upon receiving the items, if there is any defect/damage, please email to notify us in writing or SMS within a day upon receiving the shipment. Otherwise NO defect/damage claim will be allowed.
    • Buyer will have to pay for all the return shipping fees (defected item), The returned item must be in complete set or same as the condition as we ship out. Must be sent back within 7 days.
    • We will not accept return of product(s) that are been used, not compatible with your system configuration or damaged during shipment. Only manufacturer defect is accepted.
    • Shipping and handling charges, insurance and other fees are not refundable in any case. Please keep all packing material and documentation in the event of your equipment that has to be serviced, repaired or returned. The buyer holds the responsibility for the package until it arrives at our location.
    • Goods sold are not refundable or exchangeable.
     
    The warranty may not apply or void if:
     
    • All warranty will be immediately invalidated if unauthorized repairs are made or attempted by unauthorized personnel or the documents have been altered in any way or made illegible or the model or production number on the product has been altered, deleted, removed or made illegible.
    • This warranty does not cover accident, misuse, incorrect line voltage, improper installation, transport damage, altered serial number, connection to non compatible hardware and the like.
    • This warranty does not cover customer self physical damage.
    • We shall not be liable for any indirect, special or consequential damage (including without limitation any loss of profits) arising from use of the product purchased or any breach of this warranty.
    • Defects caused by abuse or misuse of the product.
    • If customer is unable to provide the Proof of Purchase.
    • Seller will not responsible for lost and damaged during delivery by courier service. All claims of damage/lost in transit will inform the buyer if the claim is successful. However, buyer has the right to claim from the courier company.

    Questions & AnswersDo you have any questions to ask merchant about this product   Ask Seller


    Display:
    User:   sha****15/04/2016 10:23 AM
    Question:   Hi. Does it comes with 4988/DRV8825 stepper motor driver?
    Answer:   Hi, Not include driver, but we do sell driver. below is the link
    http://www.lelong.com.my/merchant/littlecraft-04.Motor.Driver-C1-252369-1.htm
    15/04/2016 06:57 PM
    User:   RKN****16/06/2015 09:07 AM
    Question:   when got stock again bro ??
    Answer:   Hi.NeXT week new stock will arrive. Can u let me know your email? I will inform u once stock arrived. Thank.16/06/2015 11:34 AM
    User:   azr****07/04/2015 08:18 AM
    Question:   Hi, when will you have stock for this controller?
    Answer:   Hi, Next week will restock. Can I have your contact, will inform once restock back. Thx.07/04/2015 06:40 PM
    User:   ind****13/08/2015 04:48 PM
    Question:   i am interested with your item, please contact us, 0164387061
    View All
    0.0

    0.0 stars out of 5
    5 star
    0
    4 star
    0
    3 star
    0
    2 star
    0
    1 star
    0
    Share your thoughts with others
    Write a review
    Only buyers who purchased the product may leave a review

    Frequently Bought Together

    Customers Who Bought This Item Also Bought

    Related Products

    Recently Viewed Items

    littlecraft' Best Seller

    Promotion Items

    littlecraft' Recently Sold

    littlecraft' Items



    You may also be interested in Tag:
    * pengawal * tanjakan



    Note : The seller assumes all responsibility for listing this item. Please contact the seller to resolve any questions before or after purchasing the item. Currency is RM (Ringgit Malaysia) unless otherwise noted.
    Back to Top
    Our Affiliates : Lmall.my | Superbuy.my | Pretty.my