4 in 1 Multifrequency Remote Control Duplicator
Universal RF Remote Control Duplicator (Long Distance Signal)
4-Channel Wireless Remote Control Duplicator 433/315 Chip PT2240 / PT2242 2260 / 2262 / 2264 EV1527 / FP527/ SMC5326-3
- Use with automatic electric gates, for control of automated gates or garage doors,Fans, Lightt.
- 4-Channel Wireless Remote Control Duplicator for Garage Doors, Gate Doors, Alarm Systems, Heating Systems, Home automation e.g. Lighting and etc.
- Latest modern design and technology equals a simply smarter and unique remote.
- 4 Button can duplicate & combine up to 4 difference frequency Auto Gate Doors, Electric Magnet Door, Alarm Systems, Heating Systems, Home automation e.g. Lighting and etc.
- Handy key chain size attaches to your car keys no more unwanted bulkiness.
- This is a fixed frequency remote cloner (315/330/433.92mhz) for copying 99.99% common fixed and learning code.
- With this remote cloner you can clone all 315mhz/330mhz/433.92mhz fixed code key fobs.
- Some remotes that use this frequency are listed below.
- If your original remote are faulty may result duplicate fail
- Operating Frequency: (315/330/433.92mhz)
- Rated Voltage: 12V
- Size: 60 x 34 x 16mm
- Weight: 30g
- Voltage: 12V / 27A battery
- Operating temperature: -20°C ÷ +55°C
- Weight: 35g
- Dimensions: 34 ×54 × 13 mm
- Power consumption: 12 mA
- Range:50 - 100 m
This product can copy the remote control with the following chip inside: 2260(all manufacturers); 2262(All manufacturers); PT2264, 5326(All manufacturers);SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527(All manufacturers); 1527(All manufacturers); 2240(All manufacturers); HCS101, HCS200HCS201(part code), HCS300HCS301(part code), part single chip microcomputer.
If you fail in copying with proper operation, you might have to check whether your device has a chip above. (Not suitable for DCmoto remote control)
How to Program:
1.Press the two top buttons until the LED fast flashing, loosen all buttons and press any button, the LED only flash one time then off, at this time all the memory data is cleared.
2.Place the cloner remote and the original remote close together/side by side so that they are touching.
3.press the copy button, when the LED indicator light of new remote flashes quickly follow same squence with original remote only release both side button
4.Now programming is successfull and once you press the button LED with keep on until you release. If you want to program more buttons just repeat steps 2 for others remote.
Can store up to 4 different Auto gate remote in 1 remote control
×ÔËÑÆµ¶Ô¿½Ò£¿ØÆ÷Ê¹ÓÃËµÃ÷Êé User guide
Press button A & B hold until LED fast flashing non stop.
Release A & B button, now LED will blink 1 time if press each button
Put original remote beside new remote around 4-5mm distance
Press any button of original remote until new remote control led blink same sequence with original remote.£¨recomended wait 5 second only release both)
After both led blink in same sequence means success copy to new remote. You can store up to 4 different frequency & different Auto gate remote in 1 remote by repeated step 4
If not success duplicate, then have to repeat again from step 1.