The all-new Type-S subwoofers are more durable and powerful than ever,
delivering accurate ground pounding bass. With their new sleek design,
they look as great as they perform. They are ready for virtually any
system type desired, and have a shallow design which allows
installation even in difficult locations.
MASTER OF ALL TRADES, JACK OF NONE.
Taking a clean-slate approach in the development allowed Alpine engineers to design the subwoofer to excel in nearly every category. Whether in a small sealed or vented enclosure, these new subs possess the ability to be articulate and defined or powerful and authoritative. Deeper and more refined looking than their predecessors, they now sit at 5.6” (SWS-10D4 & SWS-10D2) and 5.9” (SWS-12D4 & SWS-12D2) deep, making them flexible for many different installation options.
MORE EXCURSION = MORE OUTPUT
The new FEA-Optimized Motor Structure together with our revolutionary HAMR Suspension Design gives the new Type-S Subwoofers the highest X-max and SPL output in the category.
With a real-world, measured 15mm of one-way X-max, the new Type-S Subwoofers deliver best-in-class output, ultra-low distortion, and unparalleled sound quality. Borrowing the HAMR suspension from the Type-R, these new Type-S subwoofers have over 30mm of one-way stroke, for a total of nearly 3” of peak-to-peak excursion!
UNDERHUNG DESIGN = MORE CONTROL
The new dual-sided CRC motor structure mimics that of the Type-R Thin subwoofers, providing these subs with an ultra-linear, highly controlled sound. This patented design (US Patent # 6,639,993) creates a perfectly symmetrical and linear magnetic field for the coil to travel in, minimizing distortion while enhancing sound quality. The high-grade double-stacked magnets ensure adequate clearance for high excursion while providing the energy needed to power these beasts.
KEEP IT COOL = KEEP IT PLAYING
Alpine’s Patented Airflow Management System (US Patent #7,684,585) helps minimize power compression and ensures reliable long playing time by actively wicking output-robbing heat away from the Voice Coil.
The massive 65mm (2.6”) diameter voice coil provides nearly double the surface area when compared to the previous 38mm (1.5”) voice coil. Similar to having a larger intercooler in a race car, the larger surface area allows for the voice coil to cool faster, ensuring that your bass tracks cleanly and reliably, without compression.
MASSIVE VOICE COILS = MAXIMUM DURABILITY
The new 6-layer (Dual 4Ω) and 5-Layer (Dual 2Ω) coils are wound on a spiral-cut aluminum former. The massive coil, along with the black anodized coating, provides these woofers the thermal mass and cooling capacity to achieve a full 500W of RMS power handling. Peak power… try 1500W.
4 UNIQUE ALPINE PATENTS
4 unique patents for the Type-S subs make them a superior subwoofer in the category.
1. FEA Optimized H.A.M.R Surround
The High Amplitude Multi-Roll Surround Design allows for extreme excursion without sacrificing valuable cone area. FEA Optimized for linearity and made with injection-molded Santoprene ® , the H.A.M.R. surround is a key part of the suspension system that allows for extreme excursion with accurate, distortion-free control.
2. FEA Optimized Dual-Sided CRC Motor Structure
Creates a symmetrical magnetic field while optimizing flux density to greatly reduce distortion, and further improving power handling and output.
3. Perimeter Venting with Airflow Management System
Forced air cooling during operation constantly cycles fresh-air through the gap to keep voice coil temperatures cool.
4.FEA Optimized Spider w/reinforced Layer Spider Integration
Ensures reliable and consistent control of the tinsel-leads to eliminate any possible mechanical noises or interference typical of many high-excursion designs.
Frequency Response: 24Hz - 200Hz
Power Range: 150W - 500 Watts RMS Power Handling: 500W
Peak Power Handling: 1500W
Mounting Depth: 177mm (7'')
Mounting Diameter: 347mm (13.7'')
Displacement: 0.07 cu. Ft.
Added Volume: 0.15 cu. ft. (Reverse Mount, Magnet Out)
Material: Oversized Hairline-Textured Mica Poly Dustcap w/ Kevlar Reinforced Pulp Paper Cone Body
Design: 2-Piece Parabolic
Material: Injected Molded Santoprene®
Design: High Amplitude Multi-Roll H.A.M.R Surround Design (Patent Pending)
Design: 10 Segment High-Roll Progressive Design
Material: 180ºC High Temp Wire on Spiral-Cut Aluminum Bobbin
Design: 5-Layer Split-Winding Dual Voice Coil
Pole Geometry: FEA Optimized Underhung Design w/ Dual-Sided Compound Radius Pole Geometry
Configuration: Dual Flared Design w/ Integrated Backplate Venting
Material: 18GA High Strength Steel
Design: Alpine-Designed 5 Leg Structure w/ Integrated Radial Voice Coil Vents
Layout: One Sided
Design: 8ga. Push Terminals
Design: Reinforced-Layer Spider Integration
Design: Concealed Mount Gasket System
Last Updated @ 10/25/2018 2:08:28 PM
Call our Customer Service Rep at +60.19.659.3061 (David) to confirm your payment. You can also email the transaction details to firstname.lastname@example.org as proof of payment.
IMPORTANT! Buyer shall bear all country, provincial, government, state and local sales, use, goods and services, value added, customs duties, import, excise, privilege and similar levies, taxes or fees and shall be responsible for assuring that the Product(s) can be lawfully imported into and complies with all laws and regulations of the destination country.
Shipment Tracking web address.
City-Link Express http://www.citylinkexpress.com/tracking.html
Shipment Tracking web address.
Pos Malaysia http://www.pos.com.my/pos/homepage/homepg_track.aspx
We understand that it can be difficult to choose products when ordering online because you don't get to feel them in your hands and get a first hand look at them.
To ease your mind and help you make your decision, we are now offering a 100% Customer Satisfaction Guarantee where you can return the product you have purchased.
There are conditions to this offer which are outlined below.
We are doing our best to ensure you are as happy as possible when ordering products through us!
If an item is damaged upon arrival, kindly take as many photos as you can of the damaged package and its contents so that we can lodge a complaint to our service provider. At the same time, we will send you a replacement unit.
If upon receiving the goods, and you find a defect, kindly get in touch with us. We will arrange for the item to be sent back to us and send you a replacement.
Most of our products are listed as No warranties due to the cost involved for buyers to return the item. However, for buyers who are willing to pay for the shipment of the items, we will accept it for servicing and repairs. Warranty period is based on per item basis. Warranty is provided by manufacturer and items must be sent back to Naluri Semesta Sdn. Bhd. at the following address together with proof of purchase:
Please contact us before hand so that we can submit a return claim on our side and then you proceed to ship item back to: