1x Arduino UNO R3 compatible
1x 3D printed casing
1x USB cable
The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2 (Atmega8U2 up to version R2) programmed as a USB-to-serial converter.
Revision 3 of the board has the following new features:
The Arduino Uno can be programmed with the Arduino software, which can be downloaded from the following site:
Select "Arduino Uno from the Tools > Board menu (according to the microcontroller on your board).
For the language reference, see the following sites:
Installing drivers for the Arduino Uno with Windows7, Vista, or XP:
Last Updated @ 10/26/2016 9:31:43 PM