|
Support any mobile phones with Bluetooth device, iPad and desktop computer. The desktop computer without Bluetooth function can be used by matching with a Bluetooth adapter. Pairing and Connection
1. Distance between the mobile phone and the headset within 1m
2. Press and hold the key OK for about 5 seconds,and then release it when the red and the blue lamps alternately blink.
3. Enable the Bluetooth function of the mobile phone, search the Bluetooth equipment, select Bluetooth sequence name for paring and connection. After connection is successful, the blue indicating lamp of the headset slowly blinks. Chinese-English voice shifting
Double click the OK key (shift before pairing with phone. After pairing, double click will be redial) Notes:
1. If pairing password needed, please enter '0000' and confirm.
2. After pairing is completed, the headset and the handset will remember each other.
Key functions of controller
On/off: Press and hold the key \u201c0K\u201d for 5 seconds to turn on/off.
Music or video pause: Press the key \u201c0K\u201d to pause playing and press the key again to resume playback.
Volume increase: Press and hold the key \u201c+\u201d; volume reduction: Press and hold the key \u201c-\u201d
Next song: press the key \u201c+\u201d; previous song: press the key \u201c-\u201d
Call Answer/hang up: press the key \u201c0K\u201d to answer when the call is incoming and press it again to hang up.
Call Rejection: Press and hold the key 0K for about 2 seconds and then release it. Setting for intelligent one-driving-two:
Step 1: pair and connect the first mobile phone
1. In the off state of the Bluetooth headset, press and hold the multifunction key for about 5 seconds and enter the pairing state when the red and blue headset indicating lamps alternately and quickly flash.
2. Enable the Bluetooth function of the mobile phone A, search Bluetooth to find 'Bluetooth sequence name' to pair and then connect. Step II: pair and connect the second mobile phone
1. Turn off the Bluetooth headset to disable the Bluetooth of the mobile phone A.
2. In the off state of the Bluetooth headset, press and hold the multifunction key for about 5 seconds and enter the pairing state when the red and blue headset indicating lamps alternately and quickly flash.
3. Enable the Bluetooth function of the mobile phone B, search Bluetooth to find 'Bluetooth sequence name' to pair and then connect. Step Ill: connect the first mobile phone with the headset again
1. Enable the Bluetooth function of the mobile phone A.
2. Find out the record of 'Bluetooth headset\u2019 previously connected under the Bluetooth menu of the mobile phone A, and then click "Connect" again.
3. At this point, the mobile phone A and the mobile phone B are simultaneously connected to the Bluetooth headset. Product Parameters
Model: BT
Use Distance: 10 m
VersionV:4.1, Chip:4.1
Battery Capacity: 80 mAh
Stand-by Time: 180 hours
Talk Time: 4.5 hours
Power lnput: DCSV/200mA
Charging Time: 2 hours
Noise Reduction: CVC6.0       
|
