loading
Car / Motorbike GPS Tracker GPRS Tracking Over Speed+Viberation Alarm

    Car / Motorbike GPS Tracker GPRS Tracking Over Speed+Viberation Alarm

    RM 338.00
    RM 688.00
    -51% Off

    Please select option below

    X

    Since 18 Apr 2008
    Chat Now
    We accept
    and more
    Buyer Protection
    with NetPay
    Full Refund if you don't receive your order*
    N/A
    N/A
    Popular Products
    Product ID : 168479411 Model / SKU : GM902 Conditions : New


    Car / Motorbike GPS Tracker GPRS Tracking Over Speed+Viberation Alarm

     

    Online Realtime Tracking and Playback Platform

    Please Notice:Now our platform support these countries,please check below before you buy it:

    EU:Portugal,Spain,France,UK,Gemany,Italy,Belgium,Switzerland,Sweden,Poland,Austria,Norway

    Finland,Ireland,Iceland,Denmark,Hungary,Greece,Ukraine,Turkey,Romania,Russia,Lithuania,Croatia,Serbia,Macedonia,Latvia

    Asia & Middle East:Singapore,HongKong,Taiwan,Indonesia,the Philippines,India,Vietnam,Thailand,Pakistan,Iraq,

    Malaysia,Syria,Saudi Arabia,Israel,Jordan,Lebanon

    America:USA,Canada,Mexico,Brazil,Costa Rica,Honduras,Panama,Guatemala,Bolivia,Uruguay,Paraguay,Columbia,

    Venezuela,Peru,Chile,Argentina

    Africa:Angola,Egypt,Morocco,Tunisia,South Africa,Nigeria,Cameroon,Madagascar,Kenya,Libya,Guinea,Mali

     

     

     It is also can be used via SMS Longitude and Latitude without platform.

     

    Please use one GSM prepaid SIM card for this device;

    And also open this gprs function if you want to use this online platform to monitor your car vehicle; 

     

     

     Technical parameter

    1.GSM:850/900/1800/1900 Quad band

    2.GPRS: Class12, TCP/IP

    3.Working Voltage:9-50V DC

    4.Working current:≈22mA (12vDC)

    5.Working current:≈12mA (24vDC)

    6.GPS locating time:Cold start≈38s(Open sky)  Warm start≈32s

                                                Hot start≈2s(Open sky)

    7.GPS Precision:10m(2D RM)

    8.Working temperature:-20℃~+70℃

    9.Working humidity:20%~80%RH

    10.Measurement:87(L)×43(W)×14(H)mm

     

     

     

    4. Device status indicators

    4.1 Connect DC 9-24V power supply and the red LED will light continuously.

    4.2 The green LED glistens when searching the GPS signals. When GPS works, the LED lights continuously.

    4.3 The intermediate blue LED (GSM signal state)

        GSM signal is normal, blue LED light long bright. No GSM signal, the blue LED flashes.

        GPS LED not fixed, flashes(0.2 sec/2 sec),Positioning long bright;

            GSM LED no signal, flashes(0.2 sec/2 sec),Signal normal long bright;

           Power LED: long bright;

        All LEDS will turn off after 5 minutes. When there is a new call, the LEDs will relight and turn off 5 minutes later.

    5. Installation

    5.1 Preparation for the installation

    5.1.1 Product Check. Open the packing box and check the device‘s model and accessories. If the model is wrong or the accessories not complete, please contact the dealer.

    5.1.2 Choose SIM card. Please insert a SIM card to the device. Please take dealer’s advice as reference.

    5.1.3 SIM card installation. Discharge the cover of the device and uncover the SIM card holder. Then insert the SIM card and cover SIM card holder (as follows).

    5.1.4 Put back the front cover and screw it up.

    5.1.5 Connect the device to the 9-24V power supply.(the red LED constant glow)

    5.1.6 Install the device in the hidden place of the car;

    The SIM card must be with GPRS function and enough deposit. If your SIM card need input PIN when power on, please cancel it.

    5.2 Installation

    The GPS tracker must be installed under professional personnel.

    Note:

    1) Please install the device in the hidden place as followings:

    Under Front windshield;

    In the front instrument panel;

    Under back windshield;

    2) Avoid being placed with signal radiators like reverse sensor ;

    3) The device has GSM antenna and GPS antenna inside. Please ensure the receiving side of the device is face up and without metal cover.

    Note:The metal cover will lessen the receiving of GPS signals.6. The device connecting requirements.

    General Waterproof design

     

    6. Device wiring requirements

    6.1 The device power supply is DC 9-24V. The red line is positive pole while the black line is negative pole.

    6.2 The negative pole of power supply connects with ground or the metals. Please do not connect with other ground lines.

    6.3 When finishing the power supply wire connection, please make the plug of power supply to the device.

            

    Relay for remote cutting off oil and power control(NOT included in the package);this accessory is not necessary,

     

    7. The Device Working

    7.1 Power on: the device will be power on when connecting to the current. Then the three LED indicators will light continuously. The device will upload the data to the online platform (the default interval of uploading data is

     10seconds). When the car is in static state for a long time, the device will be in energy saving mode and it will be more smart and precise.

    7.2  Power off:Pull off the power plug then power off the device.

     

    8. User Settings

    8.1 Set class instruction

    1)CENTER

    Text command

    Parameter

    Sample

    CENTER Add

    CENTER,A,number#

    CENTER,A,13500135000#

    CENTER Del

    CENTER,D#

    CENTER,D#

    Command Description

    1)Center number can control the oil and power and resume factory settings

    2) Center number can receive the call and text of vibration alarm and over speeding alarm.

    3) SIM must display the income call number to control oil and power.

    4) Only one number can be center number.

    5) Change center number must resend the command.

    6)Add new center number by CETNER,A, and delete by CENTER,D

    Command Feedback

    Successful Setting:SET CENTER TEL OK!

     

    2)APN

    Text command

    Parameter

    Sample

    APN Setting

    APN,apn[,username, password]

    1:APN,intenet,123,123#

    2:APN,cmnet#

    Command Description

    APN differs according to the local telecom operators.

    For example:APN request password,please refer to Sample1,and Sample2 for no password.

    Command Feedback

    Successful Setting:SET APN OK!

     

    3)TIMER

    Text command

    Parameter

    Sample

    TIMEER Parameter setting

    TIMER, uploading interval# 

    TIMER,30#

    Command Description

    Time scope:0,10~60 seconds;   0,no data uploading;

    10~60,means time interval;the default value is 10 seconds!

    Command Feedback

    Successful Setting:SET TIMER OK!

     

    4)STATIC

    Text command

    Parameter

    Sample

    STATIC

    STATIC, time interval#

    STATIC,10#

    Command Description

    Time scope:1~60 seconds;The device has3Dtransmission and the default time interval are 6 minutes.

    Command Feedback

    Successful Setting:SET STATIC TIME OK!

     

    5)RELAY

    Text command

    Parameter

    Sample

    RELAYParameter1

    RELAY,1#

    RELAY,1#   cut off oil and power

    RELAYParameter2

    RELAY,0#

    RELAY,0#   recover oil and power

     

    Command Description

    1)RELAY control the start and closeness of the relay

    2) Only the center number can operate.

    3)the device only cut off the oil circuit on the condition of the driving speed below 20KM/H or in static state.

    4)When send the command, the device will reply “please waiting“When the vehicle speed is over 20KM/H, the device will cut off the oil or the power when the speed below 20KM/H.

     

    Command Feedback

     

    Successful Setting:Relayed enable OK!

     

     

    Smart Phone or Iphone is ok for online tracking

    Online Platform is free for the first year,and the next Year fee is about 10-15USD

    6)SERVER

    Text command

    Parameter

    Sample

    SERVER Parameter

    SERVER,1/0,domain/IP,port#

    1)SERVER,1,gm902.szdatasource.com,8841#

    2)SERVER,0,121.14.139.39,8080#

    Command Description

    Change the IP and port when move to a new server

    port:10~65535

    1 is domain and 0 is IP;

    Command Feedback

    Successful Setting:SET SERVER OK!

     

    7)GMT

    Text command

    Parameter

    Sample

    GMT

    GMT,location, time zone[,half time zone]#

    GMT,E,8#

    GMT,E,5,30#

    Command Description

    The default time zone is Beijing time. If time zone need revised, please operate according to the above command.

    Command Feedback

    Successful Setting:SET GMT OK!

     

    8)VIBRATION

    Text command

    Parameter

    Sample

    VIBRATION Parameter

    VIBRATION, alarming level[,alarming way]#

    1)VIBRATION,2,3#

    2)VIBRATION,2#

    Command Description

    the sensitivity  value of the vibration is from 1 to 5,1is the most sensitive and o is close. Alarming ways: 1, calling 2, texting, 3 calling and texting.

    Must set the center number and receiving number.

    Command Feedback

    Successful reply:SET VIBRATION OK!

     

    9)SPEEDING

    Text command

    Parameter

    Sample

    SPEEDING Parameter

    SPEEDING, speed [alarming way]#

    1)SPEEDING,120,3#

    2)SPEEDING,120#

    Command Description

    The speed scope is form 60-220, if the speed is nothiscope, the alarm is off.

    Alarming :1, calling 2, texting, 3 calling and texting.

    Must set the center number and receiving number.

    Command Feedback

    Successful Setting:SET SPEEDING OK!

     

    10)RESET

    Text command

    Parameter

    Sample

    RESET

    RESET#

    RESET#

    Command Description

    Reset the device

    Command Feedback

    Successful Setting:RESET OK!

     

    11)FACTORY

    Text command

    Parameter

    Sample

    FACTORY

    FACTORY#

    FACTORY#

    Command Description

    Restore the factory setting

    Only center number can initial this function

    Factory setting will recover to the original setting

    Command Feedback

    Successful Setting:FACTORY OK!

     

    12)LANG

    Text command

    Parameter

    Sample

    LANG Parameter

    LANG,1#

    LANG,0#

    LANG,1# 

    1:CHINESE,0:ENGLISH

    Command Description

    ;When check the location, it will reply the Chinese location in Chinese language setting; while reply the URL link when in English language setting.

    Command Feedback

    Successful Setting:SET LANG OK!

     

    13)STIMER

    Text command

    Parameter

    Sample

    STIME

    STIME,Minute#

    STIME,10#

    Command

    Description

    This command is used to set the overspeed alarm time interval, to prevent frequent alarm;

    Min: 1 to 60 minutes, the default is 5 minutes;

    Command

    Feedback

    Successful Setting:SET SPEED TIME OK!

     

    14)POWER  (Only V06 version)

    Text command

    Parameter

    Sample

    POWER0

    POWER0#

    POWER0#         (Close alarm)

    POWER1

    POWER1#

    POWER1#         (Open alarm)

    Command

    Description

    This command is used to switch the external power off alarm; The default is open;

    Command

    Feedback

    Successful Setting:SET POWER SWITCH OK!

    8.2 Inquires the class instruction

    15)WHERE

    Text command

    Parameter

    Sample

    WHERE

    WHERE#

    WHERE#

    Command Description

    Check the longitude and altitude  and other information of the device

    Command Feedback

    Reply with longitude and altitude, speed and IMEL.

     

    16)123

    Text command

    Parameter

    Sample

    123

    123#

    123#

    Command Description

    Check the current location

    Command Feedback

    When check the location, it will reply the Chinese location in Chinese language setting; while reply the URL link when in English language setting.

     

    17)URL

    Text command

    Parameter

    Sample

    WHERE

    URL#

    URL#

    Command Description

    Check the location link of Google map

    Command Feedback

    maps.google

     

    18)VERSION

    Text command

    Parameter

    Sample

    VERSION

    VERSION#

    VERSION#

    Command Description

    The command is to check the software version

    Command Feedback

    VERSION:Xxxx

    BUILD:2012-07-05 10:12

     

    19)PARAM

    Text command

    Parameter

    Sample

    PARAM

    PARAM#

    PARAM#

    Command Description

    The command is to check the settings and the default parameter.

    Command Feedback

    IMEI:351190012535936

    APN:cmnet

    IP:IP and port

    TIMER: moving uploading interval

    STATIC: static uploading interval

    CENTER: center number

    LANG: language(CN/EN)

    GMT: time zone (E/W8)

     

    20)STATUS

    Text command

    Parameter

    Sample

    STATUS

    STATUS#

    STATUS#

    Command Description

    The command is designed for checking the device’s working status.

    Command Feedback

    BATTERY:100%           -- Battery status (SOC)

    GSM Signal: MIDDLE       --GSM Signal strength

    GPS:FIXED               --GPS Location condition

    GPS Signal: MIDDLE       --GPS Signal strength

    RELAYER:DISABLE        -- Oil circuit state

    CHARGER:NORMAL       -- Circuit state

     

    21) FEE

    Text command

    Parameter

    Sample

    FEE Check

    FEE, phone number, contents#

    FEE,10010,102# (China Unicom)

    FEE,10086,CXYE#(China Mobile)

    Command Description

    The command is to check the remaining fee of the SIM card

    Command Feedback

    Back to the operator’s reply.

    9. Trouble shooting

    9.1 The device is not online or offline on the web platform

    9.1.1 First, please check the three LED working state. If possible. You can call the device’s number to check.

    ● If not connected, the device is out of signal. If the GSM signals cannot reach your location, please drive to the open sky. 

    If reminding the device SIM card is out of deposit, please make deposit by the telecom operator.

    ● If you can connect to the device when calling, the SIM card has deposited and please check with your operator for GPRS function. You also can check by searching the internet on your mobile phone. 

    ● If reminding the device is power off, please turn back the device and proceed as followings:

    a) Check if the red LED is in constant glow. If the LED is dark, please check the power connecting. If fuse is broken, please return the device to the seller.

    b) If the blue GSM LED is not in constant glow, please check the installation of SIM card.

    9.1.2 Please check the offline area in order to judge if the network problem of operators.

    9.2 When GPS cannot receive the signals, please drive in the open sky and ensure there is no metal thins on the device.

    9.3 When the device cannot receive the GSM signal, please check the SIM card installation. If the GSM signals cannot reach your location (such as the basement), please drive to the open sky.

    9.4 The red LED is not glow when power on. Check the fuse of the power line. If the fuse is fused, please change the fuse with the seller.

     

     Item will be shipped out within 1 - 2 business days upon receipt of payment, excluding weekends and public holidays.Delivery time is about 7-10 business   days and it may take up to 2 weeks because we import directly from Hong Kong Warehouse to malaysia due to strict custom     inspection.  it will take about 7-15 days to arrive.

      

      

    Good Service and 1 Year Warranty(not including Shipping cost ) is our company policy.

    We sell,We care!Bid With Confidence!  

      

    For further enquiries or information please do not hesitate to contact~ Boon   0122085595  email:efuyboon@gmail.com 
    WHATSAPP :  0122085595
    LINE :  0122085595

     


    Last Updated @ 8/30/2013 11:07:27 PM


    Last Updated @ 8/30/2013 11:10:06 PM



    Buy with confidence
    We have 63 Good Ratings from buyers View More Rating >
    Buyer
    Item ID
    Date
    Ratings
    ko****
    7/26/2018 10:46:00 AM
    Thanks for your Great Service and Super FAST DELIVERY....HIGHLY RECOMMENDED THIS SELLER........AAA+++
    ko****
    7/26/2018 10:46:00 AM
    Thanks for your Great Service and Super FAST DELIVERY....HIGHLY RECOMMENDED THIS SELLER........AAA+++
    sa****
    12/11/2017 10:52:00 AM
    -
    da****
    11/1/2017 3:07:00 PM
    -
    fo****
    10/6/2017 10:44:00 PM
    Item received. Fast delivery with nice packing. Thanks seller
    mo****
    7/21/2017 9:49:00 AM
    The jazz key send is identical external but the inside is different. No idea got different in model for each key per honda car type. The immobilizer cant get in.
    ad****
    3/21/2017 3:49:00 PM
    Trusted & reliable seller👍🏽👍🏽👍🏽👍🏽👍🏽
    ph****
    1/13/2017 1:56:00 PM
    Very prompt

    Standard Delivery : Post Office Registered Mail.

    Courier : Poslaju, Skynet

    Delivery Time Frame: Pre- Order : 7~ 10 days

    Standard Parcel : 4~7 days.

    Courier Parcel : 1~2 days

    Average Product Rating

    0.0 stars out of 5
    5 star
    0
    4 star
    0
    3 star
    0
    2 star
    0
    1 star
    0
    Share your thoughts with others
    Write a review
    Only buyers who purchased the product may leave a review

    Frequently Bought Together

    Customers Who Bought This Item Also Bought

    Related Products

    Recently Viewed Items

    efuy' Best Seller

    Promotion Items

    efuy' Recently Sold

    efuy' Items




    Seller & Buyer Communication
    We provide a transparency communication between buyer & seller in a secure platform.
    Save Money & Time
    We give an access to everything buyer need at competitive prices.
    Secured & Protected
    All the information & transaction are secure with our Netpay system.
    MOBILE APPS
    app store
    google play
    RECEIVE NEWS & SPECIAL OFFERS TODAY
    Subscribe
    WE ACCEPT THE FOLLOWING PAYMENT METHODS
    netpay maybank publicbank cimb hongleong
    STAY CONNECTED
    Copyright © 2018 Interbase Resources Sdn. Bhd. (465435-U).
    All product names are trademarks of their respective companies.
    Lelong.my is not affiliated with or endorsed by any company listed on this site.