With the Phantom 3 Standard, DJI introduces 2.7K ("UHD") aerial video acquisition to the Phantom line. Its dedicated camera is mounted via a 3-axis motorized gimbal that stabilizes the footage and enables manual tilting from a dial on the controller. The control signal operates on 5.8 GHz, plus there is a 2.4 GHz Wi-Fi downlink for live 720p video monitoring and app-based control using DJI's free GO app. Thanks to a Wi-Fi range extender, the Wi-Fi boasts a range of 3280' line-of-sight. GPS equipped, the Phantom 3 Standard sports the assisted flying features, such as automatic return home, that have become staples of the Phantom series. Thanks to redesigned, more efficient motors, flight times of up to 25 minutes are possible.
A ready-to-fly-quadcopter, the Phantom 3 Standard comes prepackaged with the basics to get your started: a radio controller (transmitter), flight battery and charger, two sets of props, a mobile device clamp, 8GB memory card, and more. As will all multi-rotors, be sure to follow all pre-flight calibrations steps to ensure correct operation of the navigation system before hitting the skies.
New motors introduced with the Phantom 3 Standard feature higher performance relative tyoto their weight. Curved DJI electromagnets are used to spin the motors at high, controllable speeds - all by using magnetic force, without any physical contact, to increase durability
Intelligent Flight Control System
GPS-Assisted Autopilot System
GPS integration enables enhanced stability and a provides a number of assisted flying and full autopilot features, such as return to home, Intelligent Orientation Control (IOC), and and Point of Interest (POI) lock.
With GPS enabled, the Phantom 3 will remember its takeoff point and automatically return to the pilot if the control signal is ever lost.
After takeoff, it automatically hovers in place, waiting for your command. It then changes altitude or direction at the flick of a finger. When you want it to stop, it again pauses and hovers, waiting for your next instruction
Gimbal-Stabilized 2.7K Camera
Up to 2.7K Video and 12MP Stills
The included camera system features video recording at up to 2.7K (UHD) video in H.264 and also takes JPEG and DNG RAW photos at 12MP. In addition, it shoots Full HD 1080p video at up to 30 fps and 720p video at up to 60 fps. Video and photos are recorded to a microSD card
Integrated 3-Axis Gimbal
The gimbal provides stability by counteracting unwanted motion such as wind buffeting or vibration and also keeps the horizon level even as the quadcopter banks. A control dial on the transmitter (radio controller) allow you to manually tilt the camera
94° Wide Angle Lens
The camera features a 94° angle-of-view lens, which is a narrower angle than a fisheye for less distortion while still being wide enough to enable capturing establishing shots. The lens features an f/2.8 aperture and is comprised of 9 elements, including an aspherical element
DJI Go App for Remote Operation and Live Monitoring
Tether your iOS mobile device to the Phantom 3 Standard to view a live feed from the camera, access camera settings, enable waypoint navigation, and more. The controller features a 2.4 GHz Wi-Fi range extender and includes a clamp for holding a smartphone (included mobile device holder does not support tablets)
720p Video Downlink
Monitor a live video feel with low latency at up to 720p resolution. The radio controller features an integrated 2.4 GHz Wi-Fi range extender that boost the range up to 3280.8' line-of-sight
Remote Camera Operation
Through the app you can frame your shot, snap still, photos, and record video. It can also be used to access manual settings, such as shutter speed. Once done recording, you can use the video editor to create movies ready for sharing
Ground Station-Style Navigation
Use the app to display a live map that tracks your Phantom 3 Standard as it flies. You can also show flight telemetry (OSD), including speed, altitude, and distance. Your course and telemetry can be loged for evaluation or reminiscence back home
Handheld Radio Controller (Transmitter)
Full control is in your hands with a remote controller built specifically for the Phantom 3 Standard. Precise control sticks command flight, while a dial lets you tilt the camera to see more. It includes a built-in USB-rechargeable battery, a clamp to hold your mobile device, and a range extender for operation from up to 3280.8' away
Note: USB power source for charging available separately
Intelligent Flight Battery
The flight battery slots into the "tail" of the Phantom 3 and features and on/off switch plus four LED charge indicators that are visible while flying - so you can keep track of remaining flight time without needing to consult the app. For recharging, balance and power regulation is handled internally within the battery itself. You simply plug it into a wall outlet with the supplied power cord and you are good to go. The battery is able to lasts up to 25 minutes, depending on flying conditions
IN THE BOX