|
This item doesn't work on IOS. If you need an item which works on IOS, please buy our WIFI OBDII.
Project Bluetooth password:1234
The adapter does not support all protocols. Please check the protocols of your car model before you make order. We do not accept dispute caused by protocol problem.
Specifications:
Operating voltage:12V,internal protection from short circuits/overvoltages
Nominal idle current:45mA
Item Size:4.7 * 3.2 * 2.3cm
Item Weight:22g
Package Weight:53g
Package:
1 x New V2.1 Blue Super MINI Bluetooth ELM 327 OBD2 / OBDII ELM327 Auto Diagnostic Scanner Tool
1 x CD driver
Support OBDII Protocols:
ISO 9141-2 (5 baud init,10.4 kbaud)
ISO 14230-4 KWP (5 baud init,10.4 kbaud)
ISO 14230-4 KWP (fast init,10.4 kbaud)
ISO 15765-4 CAN (11 bit ID,500 kbaud)
ISO 15765-4 CAN (29 bit ID,500 kbaud)
ISO 15765-4 CAN (11 bit ID,250 kbaud)
ISO 15765-4 CAN (29 bit ID,250 kbaud)
Function:
1. Display current sensor data, including: Engine RPM, Calculated Load Value, Coolant Temperature, Fuel System Status, Vehicle Speed, Short Term Fuel Trim, Long Term Fuel Trim, Intake Manifold Pressure, Timing Advance, Intake Air Temperature, Air Flow Rate, Absolute Throttle Position, Oxygen sensor voltages/associated short term fuel trims, Fuel System status, Fuel Pressure etc.
2. Clear trouble codes and turn off the MIL ("Check Engine" light)
3. Compatible Phones: Android Smartphone
4. Compatible Software: Easy OBD2, ScanMaster ELM, wOBD Crazy and More
5. Processor: ELM327 v2.1
6. Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
7. Supported Software Compatible for Windows, OSX, Palm, Pocket-PC, Linux, Android, DOS, and Windows Smartphone
8. Supports OBD2 Protocols (ISO15765-4 (CAN), ISO14230-4 (KWP2000), ISO9141-2)
9. Works with Android Torque (Suggested)
10. Works with OBD2 Complaint Vehicles
The ELM327 is our multi-function OBDII Interpreter IC. It provides an RS232 to OBDII data bridge for systems that use the ISO 15765-4 CAN, SAE J1850 PWM, SAE J1850 VPW, ISO 9141-2, ISO 14230-4 and SAE J1939 protocols. In addition, we provide two generic CAN protocols that can be customized by the user for use with audio data busses, special OBD implementations, etc.
It would seem that the previous version (1.3a) offered all that anyone could need in an OBD interpreter, but we've managed to find several new features to put into the new ELM327 v1.4b chip. The data sheet explains all of these features in detail, but here's a quick listing of some of the changes:
- Power Control provides a very low power standby mode
- More J1939 support
- A non-volatile memory location for storing user data
- An option to turn off the CAN silent monitoring for bench testing, or when connecting to a dedicated CAN port
- CAN extended addressing support for experimenting with special data formats
- The ISO/KWP bus initializations may now be performed without having to send a request
- A 4800 baud ISO option, to compliment the 10400 and 9600 rates
- An SS command for searching sequentially through the protocols
- A TA command to change the Tester Address without using a PP
- The ability to quickly restore the factory calibration for the voltage reading circuit
In addition, there have been several improvements made 'under the hood', which will help with the overall reliabilty. Download either the 'QuickSheet' (a 7 page summary), or the full (76 page) Data Sheet for a more complete description of what it is now capable of. We are often asked about the differences between versions of the ELM327, as it has been updated several times. The AT Commands file provides a summary of these |
Overview:
ELM327 Bluetooth CAN-BUS scan tool supports OBD-II protocols. It is used to read & diagnose trouble codes, clear trouble codes and detect fuel pressure and so on.
Features:
Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
Clear trouble codes and turn off the MIL ("Check Engine" light).
Display current sensor data, including:
Engine RPM
* Calculated Load Value
* Coolant Temperature
* Fuel System Status
* Vehicle Speed
* Short Term Fuel Trim
* Long Term Fuel Trim
* Intake Manifold Pressure
* Timing Advance
* Intake Air Temperature
* Air Flow Rate
* Absolute Throttle Position
* Oxygen sensor voltages/associated short term fuel trims
* Fuel System status
* Fuel Pressure
Specifications:
Support OBD-II protocols as follows:
* ISO15765-4 (CAN)
* ISO14230-4 (KWP2000)
* ISO9141-2
* J1850 VPW
* J1850 PWM
Dimensions: 7 * 4.5 * 2.5cm
Net weight: 43g
Total weight: 50g
Compatibility:
* Works on all OBD2 Vehicles ( from 1996 in USA) and EOBD vehicles ( Petrol cars from 2001 and diesel cars from 2003/2004 in Europe)
* Compatible with Android Torque and Windows Smartphone, Windows PC.
Packing List:
1 * ELM327 unit (Bluetooth version)
1 * CD drive
Tested Compatible vehicles:
Benz2001/02/03W203 C200K AND 99% MAKE AFTER 2000 BENZ(ISO)
BMW E46,E39,E60 AND 99% MAKE AFTER 1999 BMW (ISO)
Chevrolet Aveo (ISO)
Citroen C3 2004 (ISO) ? Daihatsu YRV 2005 (ISO)
Daihatsu YRV Turbo 2006 (ISO)
Fiat Tipo 2002 (ISO)
Ford New Focus 2006(CAN)
99% HONDA MAKE AFTER 2001 CAN SUPPORT
Honda Accord 2006 JDM (ISO)
Honda Accord Euro R 2004 JDM (ISO)
Honda City GD8 (ISO)
Honda Civic ES 1.6A (ISO)
Honda City Vtec
Honda Insight
Honda Integra Type R DC5 JDM (ISO)
Honda Jazz 1.4M (ISO)
Hyundai Accent 2004 (ISO)
Hyundai Getz 1.3A 2004 (ISO)
Hyundai Getz 1.6M 2004 (ISO)
Hyundai Matrix 2004 (ISO)
Hyundai Accent
HyundaiSanta Fe2.4A (ISO)
Hyundai Sonata GLS (ISO)
Hyundai Sonata 2005 (ISO)
Hyundai Tuscani FX (ISO)
Kia Carens 2005 (ISO)
Kia Magentis 2005 (ISO)
KiaRioLS (ISO)
Kia Sorento SUV 2005 (ISO)
Lexus es300 Mazda 2 (CAN)
Mazda 5 (CAN)
Mazda 6 (CAN)
Mazda Premacy 2001 (ISO)
Mazda RX8 (CAN)
Mitsubishi Colt 2003 (ISO)
Mitsubishi Colt Plus 2005 (ISO)
Mitsubishi 4G93 GDI (ISO)
Mitsubishi Eclipse(GST-----Turbo Car can be tested for the year 1995-2000;RS/GS----1994-1996 GS all can do;Turbo Car for the year 1996-2000,only have speed and TPS,can clear the DTCS)
Mitsubishi Lancer Evolution IX 2006 (ISO)
Mitsubishi Pajero 3.5 V6 2006 (ISO)
Nissan Sunny B14 (ISO)
Nissan Sunny VIP FB15 (ISO)
Nissan X-Trail 2.0L 2004 (ISO)
Nissan X-Trail 2.5L 2004 (ISO)
Peugeot 206 2001 –Only can show RPM
Peugeot 206 (ISO)
Peugeot 307 (ISO)
Peugeot 407 (ISO)
Proton Inspira 2011 1.8/2.0
Proton Savvy 2008 1.2 AMT
Proton Exora Bold CFE
Proton Persona Elegance
Proton Preve 2012
Proton Waja 1.8
Renault Megane II 2005 (ISO)
Renault Kangoo 2006 (ISO)
Subaru Impreza 1.6TS 2002 (ISO)
Subaru Impreza WRX 2005 (ISO)
ToyotaCamry 2.0A 2004 (ISO)
ToyotaCamry 2.4A 2005 (ISO)
ToyotaCorolla Altis 1.6A 2005 (ISO)
ToyotaCorolla GLXi G8 1999 (ISO)
ToyotaCorolla G9 2002 (ISO)
ToyotaVios 2004 (ISO)
Chevrolet Cruze
Other tested compatible vehicle list can be viewed here:
Not available vehicles:
Nissan Sunny (N16)
Nissan Cefiro (Teana) 2005
Proton Perdana V6
Proton Saga
Proton Wira
Perodua Myvi
Perodua Alza
Subaru Legacy GT 2005
Toyotacamry 2002
ToyotaWish JDM (Missing Pin 5 in DLC)
ToyotaIST JDM (Missing Pin 5 in DLC
Last Updated @ 12/10/2018 2:31:47 AM
|
Recent Transactions
