A versatile hand kneadable, fast setting co-extruded epoxy repair system that can be used for repairing a multitude of things. It is especially suitable for application to damp, wet or underwater substrates. It comes in a handy roll form, with the white hardener encapsulated in the aqua green resin part. The product hardens in 20 – 30 minutes after mixing, to a white solid material.
Creating water features/ attaching pebbles under water in pond
Sealing holes in foundations and outer walls
Repairing generators, water and fuel pumps
Re-setting ceramic tiles in swimming pools etc
For fast and permanent repairs to damp and wet substrates, and even for underwater repairs
Patching dings, scratches, cuts, gouges and holes in fibreglass, metal and wooden boat decks and hulls
Repair of pipes, fittings, electrical connections, water tanks, tubs, sinks, spas, hot tubs, tanks, pools, leaking gaskets
Forming custom gaskets etc
Ideal for emergency in-water repairs
Repairing fishtanks, ponds, pools
Not recommended for filling or sealing joints/cracks subject to movement as the cured product is extremely hard and inflexible.
Set time increases at temperatures below 20°C
Not recommended for use where hydrostatic pressure is present prior to cure
What materials is this product suitable for?
Most plastics (pre-test required)
How to use this product
Clean surface free of grease, dirt and dust. For best results roughen bond area prior to cleaning.
Cut off required amount. Replace disc on remaining portion. Wear gloves to avoid messing hands. To mix, knead with fingers to uniform colour. If mixing is difficult, warm to room temperature.
Apply to surface to be repaired (within 12 minutes of mixing) and work the material forcefully into the surface applying pressure until adhesion begins to take effect. Mould to shape if required. If material sticks to fingers, use the plastic wrapper to press the material in place.
For a smooth appearance, remove excess and hand rub with water or a damp cloth before hardening begins.
Trim away any excess before initial hardening. Remove any residues with acetone prior to initial hardening. Hardened excess may be sanded or trimmed away once fully cured.
After 20-30 minutes Knead-It Aqua will harden and begin to form a strong bond. Allow for longer cure times at lower temperatures.
After 60 minutes Knead-It Aqua may be drilled, sanded, machined, filed, sawed or painted.
Wash hands thoroughly with soap and water after use.
1. There might be some color difference compare with actual items due to lighting and monitor setting. 2. Due to human measurement method is used, there might be 1-2cm variation. This will be considering as normal. 3. We reserve the right to amend our terms and conditions without prior notice when it deemed necessary. 4. By placing an order with us, you agree to be bound by the Terms Conditions.
Return & exchange policy :
1. No warranty for any clothes, or any wearable products like corset, slimming vest, shaping pants and etc. 2. We do not responsible for any damaged, lost or delayed by the courier company. 4. For manufaturer defect item, you may request for exchange within 7 days. Buyer have to send it back to us and the charges will be bear by seller. 5. Buyer have to responsible to track their item with courier, we will not hold any responsible if the parcel return back to us, BUYER have to pay another shipping charges in order to resend back the item.
By placing an order with us , you agree to be bound by our terms and conditions.
Questions & AnswersDo you have any questions to ask merchant about this productAsk Seller
0.0 stars out of 5
Share your thoughts with others
Write a review
Only buyers who purchased the product may leave a review
Note : The seller assumes all responsibility for listing this item. Please contact the seller to resolve any questions before or after purchasing the item. Currency is RM (Ringgit Malaysia) unless otherwise noted.