Expansion Shield X200 for Raspberry Pi B+/2B/3B

Specification:

• Input Voltage: 6V to 21Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi
• VGA output: HDMI to VGA converter supporting up to UXGA (1600×1200) and 1080p with 10-bit DAC
• Audio: 3.5mm MIC in jack
• 3.5mm stereo audio jack
• SPDIF output
• Audio IO connector (Microphone input and stereo audio amplifier 3.3Wx2)
• Wireless: WiFi (IEEE 802.11b/g/n) with external antenna
• IR sensor (38KHz)
• USB Storage: Self-powered USB hub with 3 ports
• Real-time clock (RTC): Based on DS3231SN with included CR2032 battery
• GPIO Control: 8-channel Darlington driver chip (ULN2803) allowing to control electronic circuits which require more current
• Misc: Power output socket
• Camera flex slot so camera can still be used with the expansion board attached
• DIP switch to remove connection from RPi’s pin header
• Directly connected on top of the Raspberry Pi using the board GPIO header pins
• No wiring nor soldering is required
• Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards
• Suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B NEW!
• Dimensions: 85 x 56mm(3.35 x 2.20") (Same size as Raspberry Pi)

Note: When you power Raspberry Pi with the shield power resource, please don't power it again via the Micro-USB port, it will damage the board!

Package includes:

• 1 x Expansion Shield X200 for Raspberry Pi B+/2B/3B