The one-way temperature controller can set as \u201crefrigerating\u201d or \u201cheating\u201d, using 10K general NTC thermistor to control temperature, control the one-way relay (NO, NC) output. The temperature range controlled is -45\u2103\uff5e110\u2103. It is widely used in various refrigerating and heating situations.
Under refrigerating mode, the output opens when the temperature is above (temperature control value + return difference) and stops when temperature is at the temperature control value.
Under heating mode, the output opens when the temperature is below (temperature control value - return difference) and stops when temperature is at the temperature control value.
Adjustable temperature control value and return difference value with correction function for measured temperature deviation.
Adopt DIN guide rail type installation, easy and fast to install.
Adopt the advanced design of isolating power supply, ensuring the controller work steadily, reliably and continuously when the power supply changes between 100V\uff5e250V ADC.
One-way 10K NTC temperature sensor input and one-way NO & NC output.
Shifting between the refrigerating and heating modes with temperature display.
Delay protection of compressor and power-down memory protection function.
The temperature sensing line could be connected with general wire for 100 meters.
Set the parameter to conserve long-term memory of power-down.
Brand Name: GeekTeches
Color: White + Black
Material: PCB + FR4
Probe Model: Water Drop Probe / Magnet Probe (Optional)
Installation Mode: Standard DIN rail installation or fixed installation
Display: 22 * 11mm 3 Digits LED Display
Power Supply: ADC 110-240V
Buttons: Press-type Membrane Keypad
Input: One-way (10K)NTC thermistor temperature sensor output, measuring range of -50\u2103\uff5e120\u2103
1. One-way relay NO touch spot is for refrigerating output and NC touch spot is for heating output.
2. The current capacity of the output touch spot is 5A of restrictive load and 1A of inductive load. It can control the 1000W electrical heating or electrical motor or water pump of 200W. AC contactor is needed to enlarge the capacity for greater load.
Working Temperature: -10\u2103\uff5e50\u2103
Measuring Range: -50\u2103\uff5e120\u2103
Setting Range: Minimum Limit: -45\u2103\uff5econtrolled temperature, Maximum limit: controlled temperature\uff5e110\u2103
Control Range: -45\uff5e110\u2103
Temperature Control Return Difference: 1\uff5e30\u2103
Delay Time: 0\uff5e300S
Deviation Correction: -25\uff5e25\u2103
Item Size: 93 * 55 * 44mm / 3.66 * 2.17 * 1.73in
Item Weight: 84g / 2.96oz
Package Size: 10.5 * 8 * 6cm / 4.13 * 3.15 * 2.36in
Package Weight: 123g / 4.34oz
The max load current of this product is 10A, please ensure an allowance (around 6A) during long-term using to increase the using time. The parameters and set in the user manual are those when the load connects onto the NO end. If connection onto the NC end is required, please set accordingly.
1 * Temperature Controller
1 * NTC(10K) Temperature Sensing Line
1 * User Manual