CPU |
AMD Socket AM5, support for: AMD Ryzen™ 7000 Series Processors |
|
(Please refer "CPU Support List" for more information.) |
Chipset |
AMD B650 |
Memory |
Support for DDR5 6666(OC) / 6600(OC) / 6400(OC) / 6200(OC) / 6000(OC) / 5600(OC) / 5200 / 4800 / 4400 MT/s memory modules |
|
4 x DDR5 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory |
|
Dual channel memory architecture |
|
Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules |
|
Support for AMD EXtended Profiles for Overclocking (AMD EXPO™) and Extreme Memory Profile (XMP) memory modules |
|
(Please refer "Memory Support List" for more information.) |
Onboard Graphics |
Integrated Graphics Processor: |
|
1 x DisplayPort, supporting a maximum resolution of 3840x2160@144 Hz |
|
* Support for DisplayPort 1.4 version and HDR. |
|
1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz |
|
* Support for HDMI 2.1 version and HDCP 2.3. |
|
** Support native HDMI 2.1 TMDS compatible ports. |
|
(Graphics specifications may vary depending on CPU support.) |
Audio |
Realtek® Audio CODEC |
|
High Definition Audio |
|
2/4/5.1/7.1-channel |
|
* You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings. |
|
Support for S/PDIF Out |
LAN |
Realtek® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps) |
Wireless Communication module |
AMD Wi-Fi 6E RZ616 (MT7922A22M) (For PCB rev. 1.0) |
|
WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands |
|
BLUETOOTH 5.2 |
|
Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate |
|
Intel® Wi-Fi 6E AX210 (For PCB rev. 1.1) |
|
WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands |
|
BLUETOOTH 5.3 |
|
Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate |
|
(Actual data rate may vary depending on environment and equipment.) |
Expansion Slots |
CPU: |
|
1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x16 (PCIEX16) |
|
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. |
|
Chipset: |
|
1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x4 (PCIEX4) |
Storage Interface |
CPU: |
|
1 x M.2 connector (Socket 3, M key, type 25110/2280 PCIe 5.0* x4/x2 SSD support) (M2A_CPU) |
|
* Actual support may vary by CPU. |
|
1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2B_CPU) |
|
Chipset: |
|
4 x SATA 6Gb/s connectors |
|
RAID 0, RAID 1, and RAID 10 support for NVMe SSD storage devices |
|
RAID 0, RAID 1, and RAID 10 support for SATA storage devices |
USB |
CPU: |
|
1 x USB Type-C® port on the back panel, with USB 3.2 Gen 2 support |
|
2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel |
|
CPU + USB 2.0 Hub: |
|
4 x USB 2.0/1.1 ports on the back panel |
|
Chipset: |
|
1 x USB Type-C® port with USB 3.2 Gen 2x2 support, available through the internal USB header |
|
3 x USB 3.2 Gen 1 ports (1 port on the back panel, 2 ports available through the internal USB header) |
|
4 x USB 2.0/1.1 ports available through the internal USB headers |
|
Chipset+USB 3.2 Gen 1 Hub: |
|
4 x USB 3.2 Gen 1 ports on the back pane |
Internal I/O Connectors |
1 x 24-pin ATX main power connector |
|
1 x 8-pin ATX 12V power connector |
|
1 x CPU fan header |
|
1 x water cooling CPU fan header |
|
3 x system fan headers |
|
1 x system fan/water cooling pump header |
|
2 x addressable LED strip headers |
|
2 x RGB LED strip headers |
|
1 x CPU cooler LED strip/RGB LED strip header |
|
2 x M.2 Socket 3 connectors |
|
4 x SATA 6Gb/s connectors |
|
1 x front panel header |
|
1 x front panel audio header |
|
1 x USB Type-C® header, with USB 3.2 Gen 2x2 support |
|
1 x USB 3.2 Gen 1 header |
|
2 x USB 2.0/1.1 headers |
|
1 x serial port header |
|
1 x THB_U4 add-in card connector |
|
1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only) |
|
1 x reset button |
|
1 x reset jumper |
|
1 x Clear CMOS jumper |
Back Panel Connectors |
1 x Q-Flash Plus button |
|
2 x SMA antenna connectors (2T2R) |
|
1 x DisplayPort |
|
1 x HDMI port |
|
1 x USB Type-C® port, with USB 3.2 Gen 2 support |
|
2 x USB 3.2 Gen 2 Type-A ports (red) |
|
5 x USB 3.2 Gen 1 ports |
|
4 x USB 2.0/1.1 ports |
|
1 x RJ-45 port |
|
1 x optical S/PDIF Out connector |
|
2 x audio jacks |
I/O Controller |
iTE® I/O Controller Chip |
H/W Monitoring |
Voltage detection |
|
Temperature detection |
|
Fan speed detection |
|
Water cooling flow rate detection |
|
Fan fail warning |
|
Fan speed control |
|
* Whether the fan (pump) speed control function is supported will depend on the fan(pump) you install. |
BIOS |
1 x 256 Mbit flash |
|
Use of licensed AMI UEFI BIOS |
|
PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 |
Unique Features |
Support for GIGABYTE Control Center (GCC) |
|
* Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications. |
|
Support for Q-Flash |
|
Support for Q-Flash Plus |
Bundled Software |
Norton® Internet Security (OEM version) |
|
LAN bandwidth management software |
Operating System |
Support for Windows 11 64-bit |
|
Support for Windows 10 64-bit |
Form Factor |
Micro ATX Form Factor; 24.4cm x 24.4cm |