| CPU |
LGA1700 socket: Support for 12th Generation Intel® Core™, Pentium® Gold and Celeron® Processors* |
| |
L3 cache varies with CPU |
| |
* Please refer to "CPU Support List" for more information. |
| Chipset |
Intel® B660 Express Chipset |
| Memory |
Support for DDR4 5333(O.C.)/ DDR4 5133(O.C.)/DDR4 5000(O.C.)/4933(O.C.)/4800(O.C.)/ 4700(O.C.)/ 4600(O.C.)/ 4500(O.C.)/ 4400(O.C.)/ 4300(O.C.)/4266(O.C.) / 4133(O.C.) / 4000(O.C.) / 3866(O.C.) / 3800(O.C.) / 3733(O.C.) / 3666(O.C.) / 3600(O.C.) / 3466(O.C.) / 3400(O.C.) / 3333(O.C.) / 3300(O.C.) / 3200/3000/2933/2666/2400/2133 MHz memory modules |
| |
4 x DDR DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory |
| |
Dual channel memory architecture |
| |
Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) |
| |
Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules |
| |
Support for Extreme Memory Profile (XMP) memory modules |
| |
(Please refer "Memory Support List" for more information.) |
| Onboard Graphics |
Integrated Graphics Processor-Intel® HD Graphics support: |
| |
1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz |
| |
* Support for HDMI 2.1 version and HDCP 2.3. |
| |
** Support native HDMI 2.1 TMDS compatible ports |
| |
1 x DisplayPort, supporting a maximum resolution of 4096x2304@60 Hz |
| |
* Support for DisplayPort 1.2 version and HDCP 2.3 |
| |
(Graphics specifications may vary depending on CPU support.) |
| Audio |
Realtek® Audio CODEC |
| |
High Definition Audio |
| |
2/4/5.1/7.1-channel |
| |
* To configure 7.1-channel audio, you need to open the audio software and select Device advanced settings > Playback Device to change the default setting first. Please visit GIGABYTE's website for details on configuring the audio software. |
| |
Support for S/PDIF Out |
| LAN |
Intel®2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps) |
| Wireless Communication module |
WIFI Module |
| |
WIFI a, b, g, n, ac, ax, supporting 2.4/5 GHz Dual-Band |
| |
BLUETOOTH 5.2 |
| |
Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate |
| |
* Actual data rate may vary depending on environment and equipment. |
| Expansion Slots |
1 x PCI Express x16 slot, running at x16 (PCIEX16) |
| |
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. |
| |
(The PCIEX16 slot conforms to PCI Express 4.0 standard.) |
| |
1 x PCI Express x16 slot, running at x4 (PCIEX4) |
| |
(The PCIEX4 slot conforms to PCI Express 3.0 standard.) |
| Multi-Graphics Technology |
Support for AMD Quad-GPU CrossFire™ and 2-Way AMD CrossFire™ technologies |
| Storage Interface |
CPU: |
| |
1 x M.2 connector (Socket 3, M key, type 2260/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU) |
| |
Chipset: |
| |
1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 PCIe 4.0 x4/x2 SSD support) (M2P_SB) |
| |
4 x SATA 6Gb/s connectors |
| |
Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10 |
| |
Intel® Optane™ Memory Ready |
| |
* System acceleration with Intel® Optane™ Memory can only be enabled on the M.2 connector supported by the Chipset. |
| USB |
Chipset: |
| |
1 x USB Type-C® port on the back panel, with USB 3.2 Gen 2x2 support |
| |
1 x USB Type-C® port with USB 3.2 Gen 2 support, available through the internal USB header |
| |
1 x USB 3.2 Gen 2 Type-A port (red) on the back panel |
| |
Chipset+2 USB 3.2 Gen 1 Hubs: |
| |
6 x USB 3.2 Gen 1 ports (4 ports on the back panel, 2 ports available through the internal USB header) |
| |
Chipset+2 USB 2.0 Hubs: |
| |
8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers) |
| Internal I/O Connectors |
1 x 24-pin ATX main power connector |
| |
1 x 8-pin ATX 12V power connector |
| |
1 x 4-pin ATX 12V power connector |
| |
1 x CPU fan header |
| |
1 x water cooling CPU fan header |
| |
3 x system fan headers |
| |
1 x system fan/water cooling pump header |
| |
2 x addressable LED strip headers |
| |
2 x RGB LED strip headers |
| |
2 x M.2 Socket 3 connectors |
| |
4 x SATA 6Gb/s connectors |
| |
1 x front panel header |
| |
1 x front panel audio header |
| |
1 x USB Type-C® header, with USB 3.2 Gen 2 support |
| |
1 x USB 3.2 Gen 1 header |
| |
2 x USB 2.0/1.1 headers |
| |
2 x Thunderbolt™ add-in card connectors |
| |
1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only) |
| |
1 x serial port header |
| |
1 x reset button |
| |
1 x Q-Flash Plus button |
| |
1 x reset jumper |
| |
1 x Clear CMOS jumper |
| Back Panel Connectors |
1 x USB Type-C® port, with USB 3.2 Gen 2x2 support |
| |
1 x USB 3.2 Gen 2 Type-A port (red) |
| |
4 x USB 3.2 Gen 1 ports |
| |
4 x USB 2.0/1.1 ports |
| |
2 x SMA antenna connectors (2T2R) |
| |
1 x HDMI port |
| |
1 x DisplayPort |
| |
1 x RJ-45 port |
| |
1 x optical S/PDIF Out connector |
| |
2 x audio jacks |
| I/O Controller |
iTE® I/O Controller Chip |
| H/W Monitoring |
Voltage detection |
| |
Temperature detection |
| |
Fan speed detection |
| |
Water cooling flow rate detection |
| |
Fan fail warning |
| |
Fan speed control |
| |
* Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install. |
| BIOS |
1 x 256 Mbit flash |
| |
Use of licensed AMI UEFI BIOS |
| |
PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 |
| Unique Features |
Support for APP Center |
| |
* Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications. |
| |
@BIOS |
| |
EasyTune |
| |
Fast Boot |
| |
Game Boost |
| |
ON/OFF Charge |
| |
RGB Fusion |
| |
Smart Backup |
| |
System Information Viewer |
| |
Support for Q-Flash Plus |
| |
Support for Q-Flash |
| |
Support for Xpress Install |
| Bundled Software |
Norton® Internet Security (OEM version) |
| |
cFosSpeed |
| Operating System |
Support for Windows 11 64-bit |
| |
Support for Windows 10 64-bit |
| Form Factor |
Micro ATX Form Factor; 24.4cm x 24.4cm |
