HIGH QUALITY MOLEX IDE 4PIN (M) TO ATA SATA 15PIN POWER CABLE

4 Pin IDE Molex Male to 15 Pin Serial ATA SATA Hard Drive Adapter Power Cable

Introduction

Serial ATA power cables are usually 4 or 5-pin cables with 15-pin connectors. SATA power cables currently use IDE/ATAPI to SATA power adapters.

One end of the SATA power cable is a typical 4-pin IDE/ATAPI power connector (which gets connected to an unused power cable from the power supply) and the other end (15-pin connector) is connected to the SATA hard drive.
Features

Transfer a 4Pin Molex Power Connector to SATA Female power connector
Suitable for 3.5 Inches SATA Hard Disk and 3.5 Inches SATA CD-ROM; DVD-ROM; DVD-R/W; CD-R/W and so on
Easy to install and easy to use
Simple connect the 4pin Male Molex Connector to a 4pin Female SATA connector which is supplied by your computer power adapter
Compliant with Serial ATA 1.0 Standards
Shielded cable to protect against EMI/RFI

Length: 20cm
Connector A:  4 pin molex male
Connector B:  15 pin Sata female
Package Content

1 x 20CM Molex 4 Pin Male to 15 Pin Female SATA Serial Power Cable