Day Running Light: LED (Light Emitting Diode) Lighting around 7000K
One Stop Automotive Lighting Service Center
International Automotive Lighting Brand
35 years experience on automotive lighting part manufacturing
Products certified with international automotive lighting safety standard
ECE, CAPA, SAE & ISO
Golden Bull Award at 2012
Smart Consumer Branding at 2014
Sin Chew Excellent Business Award at 2015
With E-Mark Recognition (Economic Commision of Europe)
Certifications by JPJ (Road Transport Department of Malaysia)
Legal to be use on the road
Do you face this problem before?
Driving at night without street lights are hazardous, At Eagle Eyes we make sure every drivers are equipped with headlight that helps them have better visibility of the road.
Every Eagle Eyes Headlights are dazzle-free, meaning it won't give other road users blind glares.
Normal/ Original Reflector headlights have limited light output and narrowed light angle, whence Eagle Eyes Headlights are more immense in terms of width angle and far-ranging on its light output distance.
While Reflector headlights will not illuminate too far ahead of the vehicle, Eagle Eyes Headlight will be helpful for drivers to see upcoming obstacles/ car ahead braking/ indication of corners or other hazards ahead.
Deadly accidents (Occur at Night)
Deadly accident happen mostly at night
Improve the headlight technology & it will enhance safety driving at night
Currently Malaysia is at the the top ranking of the Asian-Highest Accident Fatalities
Head Light Structure
Projector headlight provide the more clear Visibility
Day Running Light (DRL) functional for attract to the road user enhance the crash accident happen
Using the Reflector Optics during heavy rain is more better for our Visibility
Advantage Projector Head Light
Advantage for the headlight Projector is Cut Off Line which are the light output to improve road visibility & avoid blind oncoming road user eyes
Comparison Reflector vs Eagle Eyes Head Light
Eagle eyes headlight projector 3 times much longer compared vs visibility reflector headlight
Eagle eyes more visibility to 45 feet wide compared reflector lamp
Had been tested in the for light beam during heavy rain
Advantage LED Tail Light
Eagle Eyes taillight's driving light are equipped with LED / LED Light bars giving it more attention to other drivers on the rear side compared to the bulbs.
Every Taillights are designed stylishly and achieved international safetyness standard, making the vehicle look more magnificient and letting drivers drive safely at the same time.
Quality assurance when purchasing Eagle Eyes Lighting
International Certificate & JPJ Approval
Approved by JPJ (Road Transport Department of Malaysia)
Achieved international quality with certifications from ECE(Europe), SAE (US), CAPA (US) & ISO 9001
Eagle Eyes production undergoes a strict manufacturing
Which look beyond the conversion of its materials and processes which lead to quality finished products
Eagle Eyes factory in Taiwan uses the latest technology and proffesional equipment to improve the quality and efficiency of all its products
The photometric machine that EAGLE EYES used is imported from U.S.A.
This is the same machine that widely used by well-known European car automotive maker companies such as Hella, AL Automotive and Bosch to perform photometric test
It has achieved International Standard Optical test to check the compliance of the luminance (sd or lux), saturation and adjust function of each lamp
Using Geometrical measurement. A measuring project is used to check the filament geometry with regard to the statutory standards in accordance with Euro Standard
The filament has to have the size and position within the bulb specified in the standard
This is the only way to achieve optimum light power in the headlights and prevents oncoming drivers from being blinded
All of Eagle Eyes products undergo environmental tests. The engineers at Eagle Eyes Quality Assurance department have specified a clear requirement profile for every lights produced.
Headlight's projector, for example, are scrutinized by our engineers for their light distribution properties, using state-of-the-art light measuring equipment.
Paint adhesion tests in accordance with ECE automotive regulations (E-Mark of the Economic Commission for Europe), vibration and shock tests in line with ECE requirements, geometry measurements,light flux and power measurements as well as service life tests guarantee that all our customers receive it in perfect quality.
These and further tests are carried out by Eagle Eyes quality assurance engineers.
All our Automotive Lights fulfill this performance spectrum:
1. Five hours of off-road driving are simulated by uniform spraying with mud.
2. For one hour, the headlamps are subjected to temperatures between -4O°F and +176°F. Shock treatment between the arctic and tropics.
3. For one hour, the headlamps are sprayed with water at a pressure of 58 psi. This simulates driving in torrential rain.
4. One hour of vibration testing at 750 oscillations per minute. This simulates the toughest conditions resulting from potholes, cobblestone pavement, and other off-road tortures.
5. Heat Test – Part 1 – 24-hour Test
The headlamp remains switched on constantly for 24 hours – alternating between low beam and high beam.
6. Heat Test – Part 2
The headlamp is subsequently exposed to a temperature of 122ºF for one hour.
7. Vibration Test
This test simulates the behavior of the headlamp during driving.
8. Splash Test
How does the headlamp react when it is exposed to rain, splashes of water and the car wash?
9. Fogging Test
The headlamp is left switched off and exposed to water stem (68ºF, 100% air humidity).
10.Evaluation of Lighting Technology
Technical lighting investigations are carried out at Eagle Eyes. The technical specifications must meet Eagle Eyes standards before considering production.
11. Service life test
Sophisticated tests are used to prove the high reliability of the Hella bulbs over a long period.
12. Vibration and shock test
Vibration resistance of the bulbs and the filament in particular is tested on an electrodynamic vibration table.
13. Geometrical measurement
A measuring project is used to check the filament geometry with regard to the statutory standards in accordance with IEC 60810. The filament has to have the size and position within the bulb specified in the standard. This is the only way to achieve optimum light power in the headlights and prevents oncoming drivers from being blinded.
14. Light flux measurement
The Ulbricht sphere and goniometer are used to determine the light fluxes and luminous intensities of the bulbs in the headlights. This guarantees optimum light output of the bulbs.
15.Paint adhesion test
The adhesion of paint on colored glass bulbs - such as the PY21W for example - is tested in a climate chamber at different temperatures and air humidities. Optimum adhesion of glass bulb paint guarantees the prescribed amber indicator light over the complete service life period.
Our product socket designed with OEM standard, plug and play, never affect original car warranty
Canbus system to prevent car error signal problem, so you no need worry to spend extra money and time to reset the car system
We double check the lighting function before send to the customer to prevent defective issue happening
Why lens got moisture? (Moisture is not water leaking)
Moisture is not a problem, it is normal if happen within 14 days (Depends on area)
Temperature difference between internal lens and internal lamp, when the cold air go inside the light, temperature make it become moisture
It will automatically disappear within 14 days (Depends on the area)
Last Updated @ 12/20/2017 9:22:25 PM
Buy with confidencewe have 1137 Good Ratings from buyers !
Note : The seller assumes all responsibility for listing this item. Please contact the seller to resolve any questions before or after purchasing the item. Currency is RM (Ringgit Malaysia) unless otherwise noted.