HR Car Center Cone are designed to fill in the gap between the hub of the car and the center bore of the wheel.
Most wheel manufacturers design their wheels with a centerbore large enough to fit on most cars. Therefore, since wheel manufactures make their center bore large enough to fit most cars, most wheel fitments have a gap between the hub and the centerbore.
This gap usually doesn't allow for the wheel to fit hubcentric but rather lugcentric which causes vibration. Therefore, to fill the gap and ensure the fitment is hubcentric, hub rings are used.
When you put your wheels on your car, you obviously want them centered on the hub.
What most people don't realize though is that simply tightening down the bolts doesn't necessarily center them. It does a pretty good job due to the cone shape of the lug nut base but it's not quite perfect.
Think about it for a moment. When you lift up the wheel and place it on the lugs, gravity will make it sit in the lowest possible position. Then you start tightening the nuts, expecting them to pull the wheel into place. It's better than nothing, but hardly perfect.
Why HR Car Center Cone?
Using a hub adapter ensures that you've got the wheel properly centered before tightening it down
Usually,workshop personnel knows what to do if customers change to new tires and rims, of course they will be rotated (balancing process).
If your car still vibrates even though the tires and rims rotated, check your new rims if there got any space in the middle, between the hub and the rim. Means that the wheel hub did not fit with the new rims / fully seated on the wheel hub.
If this happens, your vehicle will vibrates at speed range of 90km/h and above and your steering will shack out.
This problem can be solved by using "AMT Car Centre Cone" or better known as the Center cone. Center cone is available in various sizes for fit with. Picture below is an example of Center cone could be found in the market.
About HR Car Center Cone
Material - Alloy
Suitable for all kinds of wheel rim
Do contact us for more information regarding the products installation.
Some Make and Model not listed, please contact us for more information.
Advantages of Installation HR Car Center Cone
Cure most balancing issues
Wheel is determined to be 100% balanced
Fill in the gap between the hub of the car and the center bore of the wheel.
Reduce vibration on the wheel rims.
Safety Enhanced when driving in high speed
Make wheel rims firm and tightening to wheel hub.
Improve high speed performance.
Improve traction on uneven roads.
Save Maintenance cost.
Lengthen life cycle of the Car wheel and Tyre Lifetime.
Reduce shack out and vibration of steering in high speed.
During high speed driving, assist in steadiness.
Available in a large range of sizes to suit a number of vehicles.
HR 4X4 CAR CENTER CONE
MEASUREMENT / mm
108 x 67
112 x 67
110 x 67
106 x 67
110 x 66
106 x 66
108 x 66
112 x 66
106 x 93
108 x 93
110 x 93
110 x 108
108 x 100
110 x 100
108 x 100
110 x 108
112 x 106
110 x 106
108 x 106
110.8 x 106
Last Updated @ 3/13/2017 4:27:28 PM
EACH OF OUR PRODUCTS ARE TESTED AND PROVEN THEIR RELIABILITY BEFORE WE OFFER THEM UP FOR SALES.
Note : The seller assumes all responsibility for listing this item. Please contact the seller to resolve any questions before or after purchasing the item. Currency is RM (Ringgit Malaysia) unless otherwise noted.