Frequency Response: 45Hz-35kHz
Nominal Impedance: 2 Ohm
Sensitivity (2.83V/1m): 93dB
Recommended Amplifier Power Range: 5W-200W
Speaker Diameter (in): 6-3/16"
Speaker Depth (in): 2-7/16"
Speaker Mounting Diameter (in): 5-1/8"
Speaker Mounting Depth (in): 2-1/8"
Tweeter Diameter (in): 2-1/4"
Tweeter Depth (in): 1-7/16"
Tweeter Mounting Diameter (in): 1-15/16"
Tweeter Mounting Depth (in): 11-16"
Crossover Height (in): 3-1/8"
Crossover Width (in): 3-15/16"
Crossover Depth (in): 1-5/16"
What's in the Box
- 2 Infinity Kappa component 6-1/2" (165mm) woofers
- 2 Infinity Kappa component 3/4" (20mm) tweeters
- 2 passive crossover networks
- 2 mounting adapter rings
- 2 protective grilles
- 2 foam tape pieces for mounting surface
- 2 I-Mount tweeter housings with hardware
- 2 Infinity badges for tweeter grilles
- Miscellaneous mounting hardware
- Owner’s/installation manual
A true high-fidelity 6-1/2" (165mm) component speaker system for your car. Truly great audio is a pleasure that few people experience in the automotive environment – but you can. The Infinity® Kappa® Series 60.11cs 6-1/2-inch (165-millimeter) two-way component speaker system takes the sound in your car to a whole new dimension. The Infinity brand has a pedigree of technological innovation in reference-quality audio reproduction, and much of that technology is ingrained in these speakers. The system’s woofer features patented, formed-glass-fiber Plus One® (U.S. patent no. 7,548,631) cones in proprietary Injected Carbon Glass Matrix (iCGM) frames. The system’s low-hysteresis polyproplyene capacitors and low-loss air-core inductors in the passive filter networks are of ultrahigh quality. The system’s 3/4-inch (20-millimeter) tweeter is a soft-dome, edge-driven fabric diaphragm for improved power handling and wide high-frequency dispersion. Even the soft-touch, rubberized finish on the protective grilles shows attention to detail. The Infinity Kappa 60.11cs components have what it takes to turn any car’s audio system into a high-fidelity audio lover’s dream system.
25 – 270 watts suggested amplifier power range
Infinity engineers designed the Kappa 60.11cs component speaker to produce impressive, clean sound from a head-unit or amplifier capable of delivering up to 270 watts of power. This makes the Kappa 60.11cs an ideal midrange and tweeter component upgrade for systems powered with head-unit or factory amplifier power systems. They also handle the power from aftermarket amplifiers that are part of very high-fidelity aftermarket upgrades. Remember, great power-handling specifications increase reliability over the lifetime of the speaker, and that means that you’ll be enjoying the Kappa Series for many musical years.
Injected Carbon Glass Matrix (iCGM) frames
Kappa automotive speakers benefit from light and strong composite Injected Carbon Glass Matrix (iCGM) frames. These frames help Kappa Series speakers resist the environmental extremes that a moving car can encounter. They offer superior rigidity, even when you mount them on uneven surfaces (common in car mounting locations), plus exceptional damping of resonances.
Vented motor assembly
The Infinity Kappa 60.11cs component woofer features a vented magnet assembly to let the voice coil breathe. This structure reduces the probability of power compression in systems playing loud over a long period of time. It means a more efficient use of amplifier power so that all the power delivered to the woofer is directed to the voice coil and not wasted as residual heat.
Plus One woofer-cone technology
The Plus One cone on the Kappa series offers more overall speaker-cone area than other speakers in its class. With a larger cone area, the speaker radiates more air. Also, the speaker’s carbon-injected cone material produces a lighter and stiffer cone than the competition. The result is a better low-frequency response and a greater ability to make those important, almost tangible musical notes that people often associate with a larger speaker size.
Edge-driven, soft-dome fabric tweeter
The Infinity Kappa tweeter’s 3/4-inch (20-millimeter) soft-dome, edge-driven fabric tweeter design increases power handling while reducing high-frequency distortion. An edge-driven tweeter also has better dispersion characteristics and allows for a lower crossover frequency than comparable tweeters of its size, which improves imaging. The result is improved vocals and clarity in music. There’s no sense in a speaker’s playing loud if it doesn’t sound clean, too.
2-ohm nominal impedance
The 2-ohm nominal impedance of the Infinity Kappa 60.11cs component speakers allows compensation for any added resistance in thin factory-installed speaker wiring and provides more output than factory-installed speakers or aftermarket speakers in the 60.11cs’s class.
Ultrahigh-frequency response (up to 35kHz)
A wide frequency response that extends to 35kHz helps compensate for speaker placement variations in the car and human hearing deficiencies in the high-frequency spectrum above 15kHz. The result is that the Infinity Kappa 60.11cs component speakers deliver more of the full-range frequency response that you associate with great sound.
Ultrahigh sensitivity (93dB@2.83V/1m)
High sensitivity allows a wide range of power, which has positive results without overdriving the audio system. With a sensitivity of 93 decibels at 2.83 volts/1 meter, the Infinity Kappa 60.11cs component speakers achieve excellent volume and musicality with as little as 5 watts RMS. This sensitivity means better performance overall with very moderate power, whether the speaker’s using a dedicated amplifier or not. The high sensitivity of the Kappa Series makes it ideal for upgrading a factory system’s existing speakers with very noticeable fidelity improvements.
Adjustable, push-button tweeter level control
The Infinity Kappa 60.11cs component speakers feature 0-decibel and +3-decibel settings to custom-tune the high frequencies. Custom tuning allows users to optimize the sound for different in-vehicle locations. You can custom-tune your speakers by pushing a button on the passive crossover.
High-quality passive crossover components
The passive filter components in the Infinity Kappa 60.11cs component speakers’ crossover network use only the best parts, including low-loss air core inductors, low-hysteresis polypropylene capacitors and high-quality resistors. They are engineered to require minimal parts for filtering, which also means minimizing phase-related anomalies. Overall, the combination results in each Kappa Series speaker having a unique filter arrangement with minimal but very effective parts to achieve true high fidelity, clarity and performance.
Last Updated @ 3/13/2018 5:03:06 PM
Call our Customer Service Rep at +60.19.659.3061 (David) to confirm your payment. You can also email the transaction details to email@example.com as proof of payment.
IMPORTANT! Buyer shall bear all country, provincial, government, state and local sales, use, goods and services, value added, customs duties, import, excise, privilege and similar levies, taxes or fees and shall be responsible for assuring that the Product(s) can be lawfully imported into and complies with all laws and regulations of the destination country.
Shipment Tracking web address.
City-Link Express http://www.citylinkexpress.com/tracking.html
Shipment Tracking web address.
Pos Malaysia http://www.pos.com.my/pos/homepage/homepg_track.aspx
We understand that it can be difficult to choose products when ordering online because you don't get to feel them in your hands and get a first hand look at them.
To ease your mind and help you make your decision, we are now offering a 100% Customer Satisfaction Guarantee where you can return the product you have purchased.
There are conditions to this offer which are outlined below.
We are doing our best to ensure you are as happy as possible when ordering products through us!
If an item is damaged upon arrival, kindly take as many photos as you can of the damaged package and its contents so that we can lodge a complaint to our service provider. At the same time, we will send you a replacement unit.
If upon receiving the goods, and you find a defect, kindly get in touch with us. We will arrange for the item to be sent back to us and send you a replacement.
Most of our products are listed as No warranties due to the cost involved for buyers to return the item. However, for buyers who are willing to pay for the shipment of the items, we will accept it for servicing and repairs. Warranty period is based on per item basis. Warranty is provided by manufacturer and items must be sent back to Naluri Semesta Sdn. Bhd. at the following address together with proof of purchase:
Please contact us before hand so that we can submit a return claim on our side and then you proceed to ship item back to: