When the module detects an obstacle in front of the signal , the green indicator light on the board level , while low-level continuous output signal OUT port , the module detects the distance 2 ~ 30cm, detection angle 35 °, the distance can detect potential is adjusted clockwise adjustment potentiometer to detect the distance increases ; counterclockwise to adjust the potentiometer to reduce the detection distance .
Active infrared sensors to detect the reflected , and thus the shape of the reflectivity of the target detection range is critical . The minimum detection distance which black , white maximum ; small objects from a small area , a large area from the Grand .
The output port OUT sensor module can be directly connected to the microcontroller IO port , you can directly drive a 5V relay ; Connection : VCC-VCC; GND-GND; OUT-IO
Using the comparator LM393, stable ;
Can be used for 3-5V DC power supply modules . When the power is turned on, the red power indicator light
With the screw holes of 3mm , easy fixed installation
Board size : 3.1CM * 1.5CM
VCC: external 3.3V-5V voltage (can be directly connected to 5v MCU and 3.3v MCU)
GND: GND External
OUT: small board digital output interfaces (0 and 1)
You Might Interested In (Save Shipping):
1 x IR Infrared Obstacle Avoidance Sensor for Arduino Smart Car Robot
3 x dupont wire (not shown in picture)
Shipping & Warranty:
Same/Next day dispatch by PosLaju
7 day personal warranty
Goods sold are non refunable
We Are Verified Lelong Member With I.C Submitted to Lelong. Have Confident With Us.