JBL BASS PRO II 6" 100W RMS Active Bass Reflex Enclosure Car Audio Subwoofer Box System with Built in 4-Channel Amplifier
Want big bass without giving up a lot of space?
JBL designed the compact BassPro to fit in just about any vehicle, providing powerful low-end extension for anything from a stock factory system to an elaborate aftermarket setup.
Its compact footprint – 16"(400mm) long x 9.5" (241mm) wide x 12.25" (311mm) high – allows it to be interfaced with a number of cars, trucks and SUVs. The heart of BassPro is a 100-watt four-channel amplifier that drives a unique quad-voice-coil subwoofer.The result is richer, intensified bass, supplementing and improving a car audio system with JBL’s distinctive, crisp sound quality.
The heart of the BassPro is a 100-watt 4-channel amplifier driving a custom-designed 6-1/2" quad-voice coil subwoofer. The rugged enclosure is constructed from non-resonant Medium Density Fiberboard (MDF), and its super-efficient bandpass design ensures maximum bass production.
BassPro II has been engineered for those looking to add great bass either to a factory system or as low-end extension for an aftermarket system. Its compact fooprint allows it to be interfaced with a number of cars. BassPro II is 16" Long x 9.5" Wide x 12.25" High. This unit is compact and packs serious punch. BassPro can be optimized for each installation using its on-board electronic crossover. The heart of BassPro II is a 100-watt four channel amplifier that drives a unique quad-voicec-coil subwoofer. BassPro II accepts both high-level factory system and low level aftermarket system inputs. Connections for both are provided on the unit.
The JBL BassPro features a unique 6-1/2" quad-voice-coil woofer in an efficient bandpass enclosure, powered by a 100-watt four-channel amplifier. It accepts both line-level and speaker-level inputs, allowing you to use the unit with an aftermarket system or integrate it into a factory sound system.
Subwoofer Level Control Module
The BassPro's volume can be controlled from the driver's seat with the supplied Subwoofer Level Control module. The module can be mounted under-dash, or disassembled and mounted in the dash for a factory-installed appearance. The module's dimensions are: W=1.63" (2.286" including mounting ears), H=0.885", D=1.957" (2.593" including rotary knob), Knob Diameter=0.647", Cable Length=16.25'.
This unit has a continuously variable, 70-120Hz low-pass crossover with a slope of 12 dB/octave. The crossover frequency can be adjusted on the control panel (screwdriver required).
The BassPro has gold-plated screw terminals for +12V, Ground, and Remote turn-on. Each terminal is 0.350" wide.
The BassPro is equipped with a stereo RCA line input and a stereo high-level (speaker-level) input. For the high-level input, the wires from the supplied two-channel Molex plug can be spliced into the vehicle's front or rear speaker leads.
Auto Turn On
When using the BassPro's high-level input, you can use Auto Turn On switch, located on the control panel, to turn on the unit's amplifier automatically when an audio signal is received. This circuit can also turn off the unit's amplifier after detecting no audio signal for five minutes. If you are using the line input or prefer to use the remote connection, the Auto Turn On switch should be left in the OFF position.
Amplifier Power(RMS): 100 Watts
Frequency Response: 20Hz – 120Hz
Crossover Frequencies: 70Hz – 120Hz
Input Sensitivity: 50mV to 4V Line-level input
Compact bandpass subwoofer with built-in amplifier, Input for Line, Hi or Lo input
Texture-painted MDF enclosure with silver trim
Active subwoofer bass-box with built in amp
Efficient bandpass design
Quad-voice coil 6-1/2" subwoofer
4-channel 100-watt RMS amplifier
Bass Boost & Crossovers built-in
Speaker- and preamp-level inputs
Wired remote control
18"W x 12-3/8"H x 9-3/16"D
Warranty: 1 year
What's in the Box:
Black and silver amplified subwoofer with inserted 20-amp fuse
Subwoofer level control module
16.25' RJ-11 cable (for subwoofer level control)
39" High-level input harness (with 4-pin Molex connector on one end and tinned bare wires on the other)
6 Self-tapping screws (3/4" length)
Buy with confidencewe have 7219 Good Ratings from buyers !
Note : The seller assumes all responsibility for listing this item. Please contact the seller to resolve any questions before or after purchasing the item. Currency is RM (Ringgit Malaysia) unless otherwise noted.