The LX-LD-WL6 is a new type of energy saving motion sensor lamp; the light become brighter and service time longer, it adopts PIR technology to sense motion and turn on the light automatically; it is an automatic lamp which will be on when one comes and automatically off after leaves. If you want the light to remain on for an extended period of time, just slide the switch to the "ON" setting to turn the light on and keep it on, until you turn the switch off.
Power Source : 4X1.5V AA batteries
Working current : 90mA
Static current : 30~40uA
Time delay : 10±2sec
Detection range :5m(24°C)Max
Detection angle : 120°
Working temperature :-10~+40°C
Relative humidity : <93%RH
LED quantity: 6PCS
Single power :0.06W
Rated load : 0.36W Max.
1.Slide the switch to "ON", the lamp is always on, here no sense function.
2.Slide the switch to "OFF", the lamp is powered off.
3.When the light of the environment is at less than 10 LUX, Slide the switch to "AUTO", The sensor is activated. The lamp will turn on when motion is detected. The lamp will automatically turn off 10±2s later after the last motion is detected.
4.Low-voltage Alarm: when the battery power is shortage, after the Products detect mobile signal. The red LED will flicker every 5sec until the user replace batteries.
5.Time-day is added continually : When it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time--day basis(set time).
1.Press plug piece of the base hole
2.rotate the base plug piece
3.take out the base plug piece
4.put the screw into the hold , and fixed on the wal
5.rotate the night light on the base plug piece
1.The produt shouldn't be used in the zones the air temperature changes boviously :for example air conditioning and air heating.
2.In front of the detection window there should be no obstruction or moving object to effect its detecting.
1x Wireless LED Motion Sensor Light