- New and high quality
- The pickup pattern (affecting the soundstage width) can be set to 90 or 120 according to the sound source
- It perfectly fits for any D-SLR cameras which have 3.5mm MIC socket and standard hot shoe.
- (Note: This microphone also fits for any other devices with 3.5mm MIC socket such as camcorder and DV, but it's not the perfect choice to use this microphone because the hot shoe base mount may not fit perfectly and the cable may too short to use on it.)
- Frequency response: 30-15000 Hz
- Sensitivity: -40 dB (0dB = 1 V/Pa at 1 KHZ)
- Pointing to the features: single directional x 2
- Output impedance: 200ω (Ohm)
- Signal-to-noise radio: 76 dB (1 KHZ at 1 PA)
- The loudest level: 120 dB at 1 KHZ harmonic distortion in 1% or less)
- Power supply: 3V DC
- Model: MIC-01
- Type: MS (Mid – Side) stereo wire
- Length of cable: About 11.02 inch / 28cm
- Power requirements: 3V battery
- Size: 5.12 x 2.36 x 1.38 inch / 13 x 6 x 3.5cm (L x W x H) (not including conductor)
- Color: Black
MIC 01 Microphone Package included:
- 1 x Microphone (The camera isn't included, it's for demonstration purpose.)
- 1 x Battery
Single:Classical condenser head
Sensitivity enhancement: 20dB+-2dB
Equivalent noise level:23dB A
Output impedance:200 ohm + -30%
Maximum sound pressure level:130dB (THD<=1.5% at 1KHz)
Sensitivity: -45dB+-3dB (0dB=1V/Pa at 1kHz)
1.Attachment will slide adapter to connect to the camera fixed on the slide rail microphone.
2.After confirm the camera closed, connected to the microphone L mini stereo plug the camera microphone input port.
1*Microphone( The camera is not included, it's for show only.)
If the microphone is placed next to the speaker, it may produce whistlers. If happened, please keep the microphone far away from the speaker, or reduce the volume of the speaker.
The tape change pick up mode switch settings can produce noise.
The battery indicator on the microphone. When opening the lights up and immediately go out to save battery power and prevent stray light effects shooting video. So please check the switch to confirm that the switch has been closed when you do not use it.
This is the normal condition that the light will not be on when it is powered on.
Please use the 50Hz-16KHz frequency response machine to play the recording
If you use the camera to Play recording,there will be have noise (Because the camera's frequency response is not enough to play the outside recording)
MIC-06 Microphone is specially designed for Mobile Phones and Cameras,
aimed at improving the audio quality of your videos.
Directly connect the camera or split the stand then install on the phones,
no battery required, plug and play. Compact size and lightweight,
very portable to take anywhere. An integrated shock stand
also reduces handling noise and unwanted vibrations that
can often ruin audio recordings. Includes a soft mic windshield,
can be recorded clearly in a noisy environment, also greatly
reducing wind and outdoor noise. Wide and smooth frequency band,
high sensitivity and directivity,sound pickup distance,
excellent stereophonic effect.
● Polar Pattern: Single Direction×1
● Output Connectors: 3.5mm Microphone Jack (for Cameras,
Recorders & Camcorders); 3.5mm Headphone Jack (for Smartphones, Tablets,& Mac)
● Power Requirements: No Battery Required
● Frequency Response: 100-16000Hz
● Sensitivity: -42±3dB RL=680Ω Vs1.5(1KHz 0dB=1V/Pa)
● Output Impedance: 1-2.2KΩ
● Current Consumption: Max.0.5mA
● Voltage: 1V-10V
● Signal to Noise Ratio: 110dB S.P.L
● Sensitive Reduction: 2.0V-1.5V (Sensitivity change is less than 3db)
● Dimensions: 3.54 x 1.10 x 2.36" (90x28x60mm)
● Weight: about 1.02 oz (29g)
● Works with DSLR Cameras, Camcorders, Audio Recorders, iPhone and Android Smartphones, Tablets, & Laptops
1*Stand with hot shoe
1*3.5mm audio output cable(For cameras, camcorders, audio recorders and other audio/video recording devices.)
Last Updated @ 11/15/2018 7:05:40 PM