Motion detect radar microwave sensor lamp holder E27 energy saving lamps LED lights motion

Function and features:

- Intelligent induction: when someone into this product detection range, microwave detector work light lamp, when people leave detection range, the lights go out automatically. It can automatically identify day and night.

- Intelligent delay: switch in the test to the human body each activity will be postponed after a period, and with the last human activities to postpone time starting point.

- Working way: induction switch on, in the delay period, such as human activities, switch will continue on until people leave and postpone time.

- Light control: according to the outside light intensity, to control the switch is working to achieve energy saving effect.

- infrared product comparison: radar switch induction distance farther, wide Angle, no dead zone, can penetrate glass, and thin board, according to different power, can penetrate through the different thickness of the wall, not affected by environment, temperature, dust, etc.

Use scope: corridor, toilet, basement, garage, warehouse, monitoring and energy-saving automatic lighting places.

Technical parameters:

- Power supply:  AC220V 50Hz

- Environmental temperature: -20 ~ +50(Degrees Celsius)

- Their own power: 0.5 W or less

- Load type: incandescent lamps, energy-saving lamps, the LED light source, etc. (any lamps and lanterns)

- Load power: incandescent lamp <60W;

   Energy saving lamp acuities <22W ;

   LED lamp acuities <10W

- Delay time: ~20s seconds

- Induction distance: 3~5 meters

- Induction Angle: 180 * 360 degrees, the former hemisphere

- Detection speed: 1-5m/s

kind note:

A.this product without English manual,but it is easy to set up and buyer need have base Electrical knowledge !

Package includes:

Radar microwave sensor lamp holder E27 x1

Warranty:

Within 1 Month 1 to 1 exchange