|
Product Specifications :-
- Latest multipurpose LCD cable tester and tracker developed with more functions. It has 3 main functions: wire tracer, cable fault locator, length tester. It can test the length of network / coaxial / telephone / USB cables by the way of M-S, M-R, and OPEN. The test length can be 1500m as accuracy as 98%. It also capable to do line-to-line test, crosstalk and breaking point features fast and accurate, thus serve as a practical tool for low voltage system installation and technicians maintenance of communication circuits and comprehensive wiring circuits.
- It is used widely in the fields like telephone system, computer networks and other metal lead circuits. Easily find the target cable among various wires, such as network RJ-45 UTP 5E, 6E, telephone line, coaxial cable, USB cable and other metal lines.
- This is the ideal tool for telephone system, computer network and other fields that meets wide users' requirements.
- Measure length of network cable, coaxial cable, telephone cable and USB cable with three method (M-S, M-R and OPEN), capable to measure the cable at length of 1500m, and precision of measuring cable length and position of broken line is up to 98%
- Test open circuit, short circuit, cross connection, reverse connection, pairing connection and broken wire positioning for telephone cable, BNC cable and USB cable with M-S and M-R method visually display on LCD
- Perform crosstalk test on network cable for solving the potential problem of slow speed
- Quickly find the target wire or cable among the plenty of network cables, telephone cables, coaxial lines and other various kinds of wires
- Make accurate determination of open circuit position (left, right or middle)
- Perform cable tracking on exchanger or Router with power-on
- Low voltage prompt function is available in case of over low voltage on the main unit
- Featuring simple control, large screen display and open-and -shut test result
- Automatic delay power on-off and backlight function
- With Lighting lamp enables to use in a dark environment
- Remote identifier is not necessary to perform length measurement and pairing test
- Self-checking function and automatically compensate any change in battery capacity or ambient temperature
- Single chip computer software watchdog design and reliable operation
Product Features :-
- Display: Dot matrix 128 x 64 (effective visible area is 56 x 40mm)
- Testing and Detecting Cable types:
- STP/UTP
- 5E
- 6E
- network cable
- Telephone cable
- Coaxial cable
- USB signal cable
- Common metal wires connected with alligator clip
- Testing device interface:
- Main unit: RJ45 (M)
- RJ45 (S)
- Loop interface
- BNC connector
- USB B-type female interface
- Remote identifier:
- RJ45
- RJ11
- BNC connector
- USB A-type female interface
- Length measurement
- Range: 1~1200m Calibration precision: 2% (±0.5m, or ±1.5 feet); (calibration; cable>10m)
- measurement precision: 3%((±0.5m or ±1.5ft); (AMP, CAT5E, 6E cable material)
- Display unit: meter, inch, yard
- Length calibration: User may use a cable at a known length to set a calibration coefficient. Calibration length is over 10m
- Line sequence and cable failure positioning: used for Lind Finding two-core cable or cable with over two cores
- Line finding function: used for Lind Finding two-core cable or cable with over two cores
- Operating Environment
- Temperature: -10° ~ 60°C
- Humidity: 20% ~ 70%
- Power Supply:
- Master: 9V compound tandem cell
- Receiver: 9V compound tandem cell
- Overall dimensions
- Main tester: 185 x 80 x 32mm
- Receiver: 218 x 46 x 29mm
Package Contents :-
- Main Tester
- Receiver
- Remote Identifier ( Wire Map )
- RJ-45 UTP Cable
- RJ-11 Telephone Cable
- Crocodile Clip
- Earphone
- 9V Battery
- Carrying Case
- User Manual
|
