PRODUCT NAME: Oscilloscope DIY KitJYE Tech DSO138 MINI dgtl Oscilloscope DIY Kit SMD Parts
Oscilloscope DIY KitJYE Tech DSO138 Mini dgtl Oscilloscope DIY Kit SMD Parts Pre-soldered Electronic Learning Set 1MSa/s 0-200KHz with Transparent Case
DSO138mini has similar performance as DSO138 but come with significant improvements in power supply and mechanical structure. Unlike DSO138, its power supply was greatly simplified with much less component counts. DSO138mini makes MCU and LCD stay in one PCB to avoid problematic pin-header connections that was used in DSO138. This not only increases product reliability but also allows the main board to become a flexible general purpose controller. The overall size of DSO138mini is only 2/3 of DSO138 so it is much more suitable for hand-held operation.
Features / Ciri-ciri Utama:
2.4-inch color TFT LCD with 320*240 resolution displays parameters clearly.
Make MCU and LCD stay in one PCB to avoid problematic pin-header connections.
Overall size of DSO138mini is only 2/3 of DSO138 so it is much more suitable for hand-held operation.
Improvements in power supply and mechanical structure, it can run on USB or a single cell 3.7V Li-ion battery.
Can be connected with computer for data transmission.
DSO138mini has improvements in firmware, too.
Its trigger can work reliably under 10us and 20us timebase settings.
With Auto/Normal/Single trigger modes, easy to capture the moment waveform.
Available rising or falling edge trigger.
Observable previous trigger waveform (negative delay).
Can freeze at any time waveform display (HOLD function).
Waveform storage function: will not lose the waveform after power off.
Short-circuit and open-circuit detection: can help the user find out the soldering error.
TFT controller recognition function.
All SMD parts has been soldered and the MCU has been programmed.
Comes with a transparent case, can protect the oscilloscope well.
Additional Info / Maklumat Tambahan:
The SMD parts in this DIY kit has been soldered, you just need to solder other parts by yourself.
Specifications / Spesifikasi Produk:
Material / Dibuat Daripada: PCB
Number of Channel: 1
Analog Bandwidth: 0-200KHz
Sensitivity Range: 10mV/Div - 5V/Div
Sensitivity Error: <5%
Maximum Input Voltage: 50Vpk (1X probe)
Input Impedance: 1M ohms/20pF
Resolution: 12 bits
Record Length: 1024 points
Coupling Modes: DC / AC / GND
Maximum Real-time Sampling Rate: 1MSa/s
Time Base Range: 10us/Div - 500s/Div
Trigger Modes: Auto, Normal, and Single
Trigger Position: Center of Buffer
Display: 2.4(inches) Color TFT LCD with 320*240 Resolution
Supply Voltage: DC 3.5V - 5V
Current Consumption: 120mA 5V
Main Board Size / Saiz Produk: Approx. 70 * 53mm / 2.76 * 2.1in
Analog Board Size / Saiz Produk: Approx. 81 * 70mm / 3.19 * 2.76in
Package Size / Saiz Pakej: Approx. 11 * 9 * 2.3cm / 4.33 * 3.54 * 0.91in
Package Weight / Berat Pakej: Approx. 124g / 4.37oz
Package List / Kandungan Pakej:
1 * DSO138mini DIY Kit
1 * Transparent Case
1 * User Manual (English)
Product Delivery Guarantee
All products are guaranteed to deliver to you.
If for some reasons your order item is missing or we have failed to deliver to you we shall issue you full refund or redeliver new item to you again using different courier, after proper verification from our side.
Warranty / Refund
For warranty, depending on products, we can offer you 1-6 month period. Any problem with the items, you can report to us with video as proof sent to us via email / youtube link. Once verified we can offer you full refund or replacement with our other products of the same or lower value.
We shall refund to you if your product is lost in transit or never reaches you within 21 days from date of ordered
All our products will to through some QC checks before delivery to ensure it's free from any defects. We understand we are not perfect, that's why we'll be glad to offer you refund as stated previously .
No COD offered
We'll ship out typically within 24 hours so you'll receive your item as soon as possible
Our standard delivery time is 7-10 days. However most of our customers received within 7 days, some received within 5 days etc. Our standard time is such as this allows us some time to do backorders from our oversea warehouses in case of insufficient stock in our local warehouse in Selangor & Labuan.
We use J&T Express, Citilink Express (PRIORITY), ABXexpress, LWE and sometimes POS LAJU for all our deliveries that come with online tracking number. We'll choose the best shipment provider based on locations you order. We cannot entertain any request for custom shipment provider. We ship hundreds of orders everyday and we just don't have the time for this request.
All urgent order cannot be entertained at this point of time. Kindly refer to our delivery time.
You can make payment via Lelong own payment processor, NETPAY. It's very secured, fast and convenient.
International courier with tracking code ie CityLinkExpress, Kerry Priority, Logistics Worldwide Express, EMS, SF Express, POS Laju, etc
International courier with tracking code ie CityLinkExpress, Kerry Priority, Logistics Worldwide Express, EMS, SF Express etc
For warranty, we can offer you 1 month period. Any problem with the items, you can report to us with video as proof sent to us via email / youtube link. Once verified we can offer you full refund or replacement with our other products of the same or lower value.