USB-MPI+ Adapter Programming Cable S7-300/400 RS485 Isolated PLC For SIEMENS
USB / MPI + is through the USB interfaceprovides a serial connection, and RS485 signal conversion and MPI protocol conversion programming cable. Under the control of the driver running in the computer, the computer's USB interface simulation into traditional serial ports. Thus various existing programming software, communications software and monitoring software.
The cable working power was from the USB port and PLC programming port, the converter box of LEDs indicated the status of the data transceiver.
USB / MPI + cable is optical isolation, suitable for Siemens S7-300 / 400 full range of PLC, it is particularly suitable for interference are high, easy to damage communication port industrial site, a variety of circuit protection measures to ensure the safe operation of the system.
? support USB / MPI + V4.0 operating system: Windows2000 / XP / Vista / win7
? support USB / MPI + programming software version V4.0 of: STEP7 V5.2 and higher, STEP7 Micro / Win 4.0 and above
? full-speed USB device interface, compatible with USB V2.0 specification
? Power: USB bus powered, power consumption of about 100mA, with overcurrent protection and surge protection
? USB port with anti-surge protection
? RS485 port with anti-lightning surges protection, repeatability surge capacity: Ipp = 100A (10 / 700us, 4KV) standard: ITU-TK20 / 21, VDE 0433. \u00b1 15KV ESD (electrostatic) protection
? self-recovery overcurrent protection, RS485 port can withstand up to 60V due to continuous over-current
? baud rate is 187.5Kbps
? with power indicator, active indicator
? working temperature: -20 ~ + 75 ?
Compatibility: Siemens S7-300/ 400 SIMATIC Controllers
Supports: Windows2000/Windows XP/VISTA / win7
Included: USB-MPI+ adapter cable, driver CD
Cable length: 4 m
1x Adapter cable
1x Driver CD