|
The Quad Lock® Universal Adaptor can be directly adhered to smartphones, cases, iPads / tablets or any flat metal or plastic surface and is compatible with all Quad Lock® Mounts.
SECURE MOUNTING
The Patented Dual-Stage Lock makes it quick & easy to attach / detach your device, whilst giving you the peace of mind to know your device is securely locked.
SLIM PROFILE
At just 4.5mm thick, the Quad Lock® Universal Adaptor fits seamlessly onto the back of smartphones and cases.
KEY FEATURES
3M ADHESIVE ~ Securely adhere with the best in the industry
DUAL STAGE LOCK ~ Strong, secure mounting mechanism
WHAT PHONES/CASES DOES THE UNIVERSAL ADAPTOR ADHERE TO?
The Quad Lock Universal Adaptor uses a 3M™ VHB™ (very high bond) adhesive which bonds to smooth, non textured, non-porous surfaces such as plastic and metal. It will NOT adhere to rubber, silicon, polypropylene (PP), Thermo Plastic Urethane (TPU/TPE), soft touch paints or hydrophobic (water resistant) coated glass which unfortunately is found on the back of most modern glass backed smartphones. We highly recommend using a case if your phone has a glass back.
For tape specification please refer to the 3M™ website: 3M™ VHB™
Not all phones or cases are compatible with the 3M™ VHB™ tape. The table below should be used as a reference guide only. Please ensure a sufficient bond has been achieved by the 3M™ tape before use. Use at your own risk.
Suitable Materials
~ Poly Carbonate (PC)
~ ABS
~ Aluminium
~ Un-coated Glass
Not suitable Materials
~ Rubber - Thermo Plastic Rubber/Thermo Plastic Urethane (TPR/TPU)
~ Leather
~ Silicon
~ Hydrophobic coated glass (Also known as anti-fingerprint glass which is found on most modern smartphones)
~ Soft touch paint or rubberised coatings
~ Poly Polypropylene (PP)
Always clean the application surface with alcohol and let dry before adhering the adaptor.
Recommended Cases
The following is a guide for cases that we recommend for use with the Universal Adaptor. If you're not sure what your case is made from please contact the manufacturer to confirm before use.
Lifeproof - Nuud Case
~ The rear of the case is made from a fine textured Poly Carbonate and which bonds well.
Otterbox - Commuter, Defender and Symmetry Series Cases
~ The outer shell of these cases is made from Poly Carbonate and which bonds well.
What Included
1 x Quad Lock® Universal Adaptor V2
Feeling of excitement every time you Twist, Lock & Go!
30 Day Money Back Guarantee
Tech Spec
~ 3M™ VHB adhesive
~ Slim profile (only 4.5mm thick)
~ Just 56mm wide and 66mm tall
~ Durable and tough composite construction
~ Adheres to flat and slightly curved surfaces
Please note: The 3M™ VHB adhesive will adhere to smooth, non-textured, non-porous surfaces such as plastic and metal. It will NOT adhere to rubber, silicon, TPU or soft touch coatings.
Please ensure the application surface is thoroughly cleaned and dry before applying the adaptor.
The 3M™ VHB adhesive is a single use adhesive, it is NOT re-usable.
Please visit our website at http://www.ecomtb.com.my OR https://shopee.com.my/eco_mtb
** There is 1-3cm errors due to manual measurement. Please kindly understand.
** Actual product colour may slightly vary due to photographic lighting sources or your monitor settings.
** WE DO NOT DO COD
** ONLINE ONLY
** We support original products only.
** PRICE INDICATED IS ALREADY BEST PRICE, EXCLUDE COURIER
Last Updated @ 5/17/2021 4:22:54 PM
|
