Raspberry Pi 5MP Camera Board

This is the earlier version of Raspberry Pi Camera Module, so called 5 Megapixel, Rev 1.3. It is a custom designed add-on for Raspberry Pi and is compatible with all Raspberry Pi model including:

• Raspberry Pi 3 model B
• Raspberry Pi Zero V1.3
• Raspberry Pi Zero W (Wireless)

It attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface. This interface uses the dedicated CSI interface, which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data.

Note: Raspberry Pi NOT INCLUDED.

The package include:

• 1 x Raspberry Pi 5MP camera sensor board
• 1 x 15cm length CSI ribbon cable for standard Raspberry Pi
• 1 x 15cm length CSI ribbon cable for Raspberry Pi Zero series

The board itself is tiny, at around 25mm x 20mm x 9mm. It also weighs just over 3g, making it perfect for mobile or other applications where size and weight are important. It connects to Raspberry Pi by way of a short ribbon cable. The camera is connected to the BCM2835 processor on the Pi via the CSI bus, a higher bandwidth link which carries pixel data from the camera back to the processor. This bus travels along the ribbon cable that attaches the camera board to the Pi. Yes, we know Raspberry Pi Zero and Zero W has different CSI connector, this camera comes with 2 different ribbon cables, one for standard Raspberry Pi and the compact Raspberry Pi (The Zero series).

The sensor itself has a native resolution of 5 megapixel, and has a fixed focus lens onboard. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video.

The camera is supported in the latest version of Raspbian, Raspberry Pi's preferred operating system.