[ready stock] RC WiFi LED Strip Lights 32.8ft RGB LED Strip Light 5050 LED Light Strip Color Changing LED Strip Lights with Remote APP Control for Home Decoration Works with Android,iOS, Alexa, Siri, IFTTT
Led Strip Lights kit include :
2 x 16.4ft 150 LEDs SMD5050 RGB Led Strip
1 x led wifi controller
1 x 24key IR remote
1 x 12V 5A power adapter
1 x product manual
1 x Qr code card
1 x adhesive tape
1 x connect cable
1, The Led Strip Lights can be only connected and controlled in the wifi network, when your cell phone connected under the LED WIFI controller network, the cellular data is unavailable to use. otherwise, the WiFi signal will offline and unable to control.
please add the controller to your network then you can use the WiFi data and control the Led Lights at the same time, no need to control the Led Lights via"LEDnetXXXXX" anymore. when you add WiFi controller to your own network, you can only connect through the 2.4GHz network instead of 5GHz. after that the Led Lights can be controlled in both of the 2.4GHz or 5GHz networks.
2, If the LEDnetxxxxxx network cannot be found in your wifi list, please reset it to the default, here is the way to reset:
reset the wifi controller by plug and unplug the connector four times, wait for 1 to 3 seconds each time you plug/unplug the connector.
3, The Magic Home pro app requires a registered account for the first time you launch the app, the account will be used to activate the voice control for Alexa and Google Home.,,
Three ways to Control Your LED Strip Lights
The Led Light Strip can be controlled in three ways, smartphone App, voice assistant, and 24key IR Remote control
Use the smartphone app to control your Led Lights, make sure that your device's operating system at least IOS 9.0 or Andriod 4.0.
Voice Control/Assistant, for now, support with Alexa, Google Assistant, IFTTT. the RGB Led Strip can be controlled or changed by your voice when you speak to the voice assistance.such as Alexa, turn the Led Lights on/off, dim/brighten, set Led Lights to daylight white, change to the red. etc.
The 24key IR remote, press the button, and you can get the colors and modes you want.,
How to connect it with you smartphone?
1, Android smartphone can download it from Google Play Store, and IOS devices can download it from the Apple store. scan the Qr code get a quick download channel. App installation will be finished within half minutes.
2, Go to your phone setting, find the WIFI or WLAN set, turn it on then you will find a LEDnetXXXXXX network on your list, connect it.
3, Open the app you installed, the app might require a registered account at the first time you use. then you can see from the list that you have a device connected with your phone, enter into it, now you can choose the color, mode or other functions you want. enjoy it!, B07GLC165Q