As long as the phone has network(2G/3G/WiFi), you can remotely control all your devices anyway. The APP supports
- Checking all devices status
- Remotely turn on or off the devices by phone anyway
- Setting maximum 8 timing schedules
eWeLink APP Operation
1.Download the APP to your smart phone or tablet
Download the Android version APP from here.
Or search eWeLink on Google Play.
Scan below QR Code to download eWeLink.
2.Install the APP to your smart phone
3.Register a new account
You`ll need to enter your phone number/email address and a password(at least 8 characters). Enter SMS verification code to register. Updates: Users from Asian countries MUST register with mobile phone number. While users outside Asian area MUST register with email address.
4.Login with your account.
Android Version eWeLink:
1) For Android version, you must switch on the WiFi on your phone before adding device.
2)Long press the “SET” button(pairing button) on Sonoff/Slampher/Smart Socket/Sonoff RF until the green LED indicator fast blinks(you can use your finger to press directly).
3)Click the search icon in the middle. Check out the blinking way and select corresponding adding way, then click"next".
4)Select your WiFi account and enter password(If no password, keep it blank), click remember so that next time you don’t need to fill in again, click"next".
5)Then it will auto-search and connect the “ITEAD-100000xxxxx” device around you.
6)Name your device,access the device and control it.
iOS Version eWeLink:
1)Click the search icon in the middle.
2)Long press the ''SET'' button(pairing button) on Sonoff/Slampher/Smart Socket/Sonoff RF until the green LED indicator fast blinks. Check out the blinking way and select corresponding adding way, click"next".
3)If your device belongs to 2nd generation (led indicator flash 3 times and repeat), then open phone Setting>WiFi>connect the WiFi beginning with ITEAD, enter default password 12345678.
4)Go back to the App to confirm.
5)Then enter your WiFi router SSID and password.(If no password, keep it blank)
6)Finally, name your device and submit.
NOTE: If you see the new added device is offline, please wait for a few seconds. If it stays offline, please restart the device, if everything is ok, it will become online on the App.
If you use use WiFi A to add the device, when switch to WiFi B, you will unable to control the device. To make the device work with WiFi B, you need to delete it add it over WiFi B.
One device has one owner. If you have successfully added a device to your account, you cannot add this device to another account unless you delete it from account from the first account. Only the owner of the device can share it to other accounts.