The Mupid-exU System gel electrophoresis equipment has several novel features including multichannel pipettor compatibility, a UV-transmissible tank, cover placement light sensor, 7 output voltage settings (18V, 25V, 35V, 50V, 70V, 100V and 135V) and a timer function. These added features enhance the Mupid-exU System's usability and safety.
Completely UV-transmissible tank materials
The Mupid-exU System is made of highly UV-transmissible plastic (transmission: 50% at 254 nm, 80% at 312 nm), allowing direct observation of bands during gel electrophoresis following placement of the tank on a transilluminator.
High sample capacity - compatible with multichannel pipettors
The Mupid-exU System allows simultaneous gel electrophoresis of up to 104 samples in a single gel (26 wells x 4 rows or a total of 96 samples + 8 markers).
The Mupid-exU System is wider than the original Mupid gel electrophoresis equipment and can accommodate 13 or 26 lanes, enabling sample loading with multichannel pipettors (9 mm depth for 13 wells, 4.5 mm depth for 26 wells).
The timer can be set to a range of 1–99 minutes and includes an alarm function.
A memory function is provided for storage of the previous timer and output settings.
Variation of input and output voltages
Output voltage can be selected from among 7 levels (18V, 25V, 35V, 50V, 70V, 100V and 135V). Input voltage can be set between 100–240V, allowing worldwide use.
Gel electrophoresis equipment tank (1 unit)
External dimensions: 183 mm (W) x 164 mm (L) x 56 mm (H)
Buffer volume: Approx. 330-350 mL (including gel and buffer)
Material: UV-transmissible resin (transmission: 50% at 254 nm, 80% at 312 nm)
Safety cover (1 cover)
External dimensions: 197 mm (W) x 169 mm (L) x 38 mm (H)
Power supply (1 unit)
External dimensions: 64 mm (W) x 164 mm (L) x 59 mm (H)
Input: AC100-240 V, 50/60 Hz
Output: 18V, 25V, 35V, 50V, 70V, 100V, and 135V (140V for each peak, waveform control)
Timer function: 1-99 min. and continuous power distribution (suspendable)
Memory function: Automatic storage of prior settings
Safety function: Cover placement confirmation by light sensor
exU Gel Maker Set L (1 set)
Gel maker stand for exU (1 unit): 149 mm (W) x 125 mm (L) x 20 mm (H)
Gel tray L for exU (1 tray): 130 mm (W) x 122 mm (L) x 13 mm (H)
Gel tray S for exU (2 trays): 130 mm (W) x 59.5 mm (L) x 13 mm (H)
Note : The seller assumes all responsibility for listing this item. Please contact the seller to resolve any questions before or after purchasing the item. Currency is RM (Ringgit Malaysia) unless otherwise noted.