Autogate wifi remote open/close by smartphone far distance control (oversea also control)
1 or 2 channel door open feature for swing autogate (single or double door)
Wifi password protected
share up to 10 smartphone user
Sonoff wifi system control by Apk (Ewelink)
Anytime anyway can open your autogate by smartphone as long as there is internet connection (don't need bring remote control key)
How to Pairing Autogate remote With Wifi :
Add devices (Download ewelink app and register with you mobile number) Android Version eWeLink:
1) For Android version, you must switch on the WiFi on your phone before adding device. 2)Long press the “SET” button(pairing button) on Sonoff/Slampher/Smart Socket/Sonoff RF until the green LED indicator fast blinks(you can use your finger to press directly). 3)Click the search icon in the middle. Check out the blinking way and select corresponding adding way, then click"next". 4)Select your WiFi account and enter password(If no password, keep it blank), click remember so that next time you don’t need to fill in again, click"next". 5)Then it will auto-search and connect the “ITEAD-100000xxxxx” device around you. 6)Name your device,access the device and control it.
iOS Version eWeLink:
1)Click the search icon in the middle. 2)Long press the ''SET'' button(pairing button) on Sonoff/Slampher/Smart Socket/Sonoff RF until the green LED indicator fast blinks. Check out the blinking way and select corresponding adding way, click"next". 3)If your device belongs to 2nd generation (led indicator flash 3 times and repeat), then open phone Setting>WiFi>connect the WiFi beginning with ITEAD, enter default password 12345678. 4)Go back to the App to confirm. 5)Then enter your WiFi router SSID and password.(If no password, keep it blank) 6)Finally, name your device and submit.
NOTE: If you see the new added device is offline, please wait for a few seconds. If it stays offline, please restart the device, if everything is ok, it will become online on the App.
If you use use WiFi A to add the device, when switch to WiFi B, you will unable to control the device. To make the device work with WiFi B, you need to delete it add it over WiFi B.
One device has one owner. If you have successfully added a device to your account, you cannot add this device to another account unless you delete it from account from the first account. Only the owner of the device can share it to other accounts (others phone).
LED indicator meanings（for all ITEAD smart home devices）
1. There are two kinds of led flash ways when in pairing state (for smart devices of 1st generation and 2nd generation respectively). For devices of 1st generation, during adding process, iOS users need to go to Setting–>Wi-Fi, and connect the WiFi starts with ITEAD-******* with the password 12345678. While android users do not need to set this.
2. Led slow flashing = not connect to Wifi, Led fast flashing = waiting for pairing, Led stay on = Success connected to Wifi
We can provide walk in installation with Labour cost for klang valley area with appointment.
DIY Package :
1 X Wifi Autogate Control PCB with cover box
1 X 12V AC~DC adapter
PCB come with 3 months manufacturer deflect warranty (not include wrongly connect input power)
Note : The seller assumes all responsibility for listing this item. Please contact the seller to resolve any questions before or after purchasing the item. Currency is RM (Ringgit Malaysia) unless otherwise noted.