For insurance purposes:
If your alarm system was not bought with us,we advise you buy it with your orignal seller.
We can't confirm it whether fits to your alarm system!!!
2. How to install
Open the power switch on the side of the detector at first. Mounting height is adjust to 2.2m or so. Mounted on the corner of the room is preferable, and its detecting direction perpendicular to the people walking direction will have best effect.
Mounting method: take out the bracket in the accessories and fix it on your wall, fix the detector to the bracket and adjust its detection angle to best position.
The following aspect should be noted:
1.The infrared detector may not direct to outward window
2.Obstacles on its front have negative effect
3.More than two infrared detectors should not be installed on the same area
4.Strong wind flow, fire, radiator should be avoided, for it may trig wrong alarm message
5.When the infrared detector powered up, it will take five minutes to adapt itself to normal working mode
6.The infrared detector can only used in closed room, not used in open ground
• 1 X PIR Infrared Detector
• 1 X Wall Mount kit
Last Updated @ 6/8/2017 12:09:37 PM
Last Updated @ 12/21/2017 1:48:55 PM
Buy with confidencewe have 2931 Good Ratings from buyers !
Note : The seller assumes all responsibility for listing this item. Please contact the seller to resolve any questions before or after purchasing the item. Currency is RM (Ringgit Malaysia) unless otherwise noted.